[Sun Jun  9 01:00:41 2013] Detection parameters:
  Position = (288.7, 277.2) = 20 20 27.91 43 51 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36858.2 +/- 225.4
  Background counts = 19.0
  Rate = 2 +/- 0.01

[Sun Jun  9 01:00:42 2013] Off-axis axis estimate = 1.69'
[Sun Jun  9 01:46:21 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 01:46:21 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun  9 01:46:21 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Sun Jun  9 01:46:21 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jun  9 01:57:19 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  9 01:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 01:57:19 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  9 01:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 01:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 01:57:19 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  9 01:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 01:57:19 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  9 01:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 01:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555471101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 01:57:29 2013] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun Jun  9 01:57:29 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 01:57:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 01:57:29 2013] Assessing source extent using major
[Sun Jun  9 01:57:29 2013] Source does appear to be extended
[Sun Jun  9 01:57:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 02:18:44 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 02:18:44 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun  9 02:18:44 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Sun Jun  9 02:18:44 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sun Jun  9 02:32:46 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  9 02:32:46 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  9 02:32:46 2013] Fit fullrun_mos2_xmm0555471101_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun  9 02:32:46 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  9 02:32:46 2013] fullrun_mos2_xmm0555471101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  9 02:32:46 2013] Fit fullrun_mos2_xmm0555471101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  9 02:32:51 2013] Spatial fit model total counts = 34531.600000, observed total counts = 32712.000000
[Sun Jun  9 02:32:51 2013] Offset between fit and detection position for source 1 = 0.187502 pixels
[Sun Jun  9 02:32:51 2013] 34391.660000 total counts/ 8878.860000 bgd. counts: snr = 270.756892
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.187502 pixels
  Position = (288.7, 277.4) = 20 20 27.88 43 51 17.7
  Extent = 5.6 (5.5-5.7)" x 5.0 (5.0-5.1)", rotation angle = 358 (353-2) degrees
  Source counts = 25512.8 +/- 185.4
  Background counts = 8878.9
  Rate = 1 +/- 0.008
[Sun Jun  9 02:32:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 02:32:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 02:32:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 02:32:51 2013] Source does appear to be extended
[Sun Jun  9 02:32:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sun Jun  9 08:33:49 2013] Counts = 25512.800000, rescaling region sizes by 3.000000
[Sun Jun  9 08:33:49 2013] XMMSAS src. selection expression = ellipse(25071.121800, 24084.968800, 1008.376229, 904.287626, 357.685645, X, Y)
[Sun Jun  9 08:33:49 2013] Writing source region out to fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  9 08:33:49 2013] Extracting stamp from image fullrun_mos2_xmm0555471101_pi300-10000_cl_sm2.00.img.gz, (231, 219) - (347, 335)
[Sun Jun  9 08:33:49 2013] XMMSAS bgd. selection expression = annulus(25071.121800, 24084.968800, 5041.881145, 10083.762290, X, Y) && !ellipse(14949.869354, 28683.945618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24318.612823, 23621.821625, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 08:33:49 2013] Writing fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1.gif
[Sun Jun  9 08:33:54 2013] Mean detx,y = (101.42, 63.25) 
[Sun Jun  9 08:33:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 08:37:25 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 08:37:25 2013] Setting source spectrum file to fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  9 08:37:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  9 08:47:42 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:47:42 2013] Total counts from fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 34010.00
[Sun Jun  9 08:47:42 2013] Total counts from fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 8134.00
[Sun Jun  9 08:47:42 2013] Got source and background scale factors 2660640.000000, 130560170.000000
[Sun Jun  9 08:47:42 2013] User source parameters:
  Position = (288.7, 277.4) = 20 20 27.88 43 51 17.7
  Extent = 5.6 (5.5-5.7)" x 5.0 (5.0-5.1)", rotation angle = 358 (353-2) degrees
  Source aperture counts = 33844.2 +/- 185.4
  Background aperture counts = 165.8
  Rate = 1 +/- 0.008

[Sun Jun  9 08:47:42 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:47:42 2013] Using photon index=1.80, rate=1.04, arf fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1.arf
[Sun Jun  9 08:47:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:47:42 2013] Updating source flux to 1.8e-11
[Sun Jun  9 08:47:46 2013] xmm0555471101/analysis//spectral/fullrun_mos2_xmm0555471101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete