[Sat Jun  2 04:43:54 2012] Detection parameters:
  Position = (321.6, 303.8) = 20 20 27.83 43 51 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 403427.8 +/- 757.9
  Background counts = 105.1
  Rate = 2e+01 +/- 0.03

[Sat Jun  2 04:43:54 2012] Off-axis axis estimate = 1.72'
[Sat Jun  2 04:47:20 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 04:47:20 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun  2 04:47:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sat Jun  2 04:47:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun  2 05:38:31 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  2 05:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 05:38:31 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  2 05:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 05:38:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 05:38:32 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  2 05:38:32 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  2 05:38:32 2012] Fit fullrun_pn_xmm0555470901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  2 06:02:47 2012] Spatial fit model total counts = 339115.000000, observed total counts = 357903.000000
[Sat Jun  2 06:02:47 2012] Offset between fit and detection position for source 1 = 0.217442 pixels
[Sat Jun  2 06:02:47 2012] 338605.000000 total counts/ 25600.000000 bgd. counts: snr = 1956.281250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.217442 pixels
  Position = (321.4, 303.7) = 20 20 27.91 43 51 16.3
  Extent = 7.0 (7.0-7.1)", rotation angle = 0
  Source counts = 313005.0 +/- 581.9
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Sat Jun  2 06:02:47 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:02:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:02:47 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 06:02:47 2012] Source does appear to be extended
[Sat Jun  2 06:02:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 06:02:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  2 06:02:54 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sat Jun  2 06:02:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.113
[Sat Jun  2 06:02:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.04"
[Sat Jun  2 07:08:32 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  2 07:08:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 07:08:32 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  2 07:08:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 07:08:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 07:08:32 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  2 07:08:32 2012] fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  2 07:08:32 2012] Fit fullrun_pn_xmm0555470901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  2 11:47:13 2012] Spatial fit model total counts = 339114.000000, observed total counts = 357903.000000
[Sat Jun  2 11:47:13 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Sat Jun  2 11:47:13 2012] 338604.000000 total counts/ 25600.000000 bgd. counts: snr = 1956.275000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (321.4, 303.7) = 20 20 27.91 43 51 16.3
  Extent = 7.0 (7.0-7.1)", rotation angle = 0
  Source counts = 313004.0 +/- 581.9
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Sat Jun  2 11:47:13 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 11:47:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 11:47:13 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 11:47:13 2012] Source does appear to be extended
[Sat Jun  2 11:47:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 11:47:22 2012] Counts = 313004.000000, rescaling region sizes by 3.000000
[Sat Jun  2 11:47:22 2012] XMMSAS src. selection expression = ellipse(27915.172000, 26374.058200, 1267.723836, 1267.723836, 0.000000, X, Y)
[Sat Jun  2 11:47:22 2012] Writing source region out to fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  2 11:47:22 2012] Extracting stamp from image fullrun_pn_xmm0555470901_pi300-10000_cl_sm2.00.img.gz, (249, 231) - (394, 377)
[Sat Jun  2 11:47:22 2012] XMMSAS bgd. selection expression = annulus(27915.172000, 26374.058200, 6338.619182, 12677.238365, X, Y) && !ellipse(29028.491425, 27196.417664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29547.849670, 26748.997437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20191.671127, 34209.151855, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  2 11:47:22 2012] Writing fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1.gif
[Sat Jun  2 11:48:25 2012] Mean detx,y = (105.21, -202.49) 
[Sat Jun  2 11:48:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 11:54:59 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 11:54:59 2012] Setting source spectrum file to fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 11:54:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 13:27:44 2012] Updating aperture counts using extracted products
[Sat Jun  2 13:27:44 2012] Error reading totcts from fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 13:27:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 13:27:44 2012] Using photon index=1.80, rate=11.1, arf fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 13:27:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 13:27:44 2012] Updating source flux to 3.4e-11
[Sat Jun  2 13:29:39 2012] Reading fit data from xmm0555470901/analysis//spectral/fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  2 13:29:39 2012] Spectral fit parameter nH value = 6.12875e+21
[Sat Jun  2 13:29:39 2012] Spectral fit parameter PhoIndex value = 2.01343
[Sat Jun  2 13:29:39 2012] Failed to get F(0.3-8.0) from xmm0555470901/analysis//spectral/fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 13:29:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 13:29:39 2012] Using Nh = 6.1e+21, photon index=2.01, rate=11.1, arf fullrun_pn_xmm0555470901_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 13:29:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 13:29:39 2012] Updating source flux to 5.1e-11