[Mon Jul  9 10:30:39 2012] Detection parameters:
  Position = (281.3, 283.1) = 20 20 27.73 43 51 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230585.6 +/- 555.4
  Background counts = 89.8
  Rate = 1e+01 +/- 0.03

[Mon Jul  9 10:30:40 2012] Off-axis axis estimate = 1.67'
[Mon Jul  9 10:33:39 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 10:33:39 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Jul  9 10:33:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Mon Jul  9 10:33:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Jul  9 12:59:30 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  9 12:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 12:59:30 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  9 12:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 12:59:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 12:59:31 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  9 12:59:31 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  9 12:59:31 2012] Fit fullrun_pn_xmm0555470701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul  9 14:33:32 2012] Spatial fit model total counts = 190736.000000, observed total counts = 198916.000000
[Mon Jul  9 14:33:32 2012] Offset between fit and detection position for source 1 = 0.104879 pixels
[Mon Jul  9 14:33:32 2012] 190734.000000 total counts/ 25600.000000 bgd. counts: snr = 1032.087500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104879 pixels
  Position = (281.3, 283.2) = 20 20 27.72 43 51 16.0
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 165134.0 +/- 436.7
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Mon Jul  9 14:33:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 14:33:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 14:33:33 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 14:33:33 2012] Source does appear to be extended
[Mon Jul  9 14:33:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 14:33:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  9 14:33:43 2012] Initial guess for spatial extent in simple fitting = 6.69"
[Mon Jul  9 14:33:43 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.963
[Mon Jul  9 14:33:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.69"
[Mon Jul  9 16:40:40 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  9 16:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 16:40:40 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  9 16:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 16:40:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 16:40:40 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  9 16:40:41 2012] fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  9 16:40:41 2012] Fit fullrun_pn_xmm0555470701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  9 17:13:15 2012] Spatial fit model total counts = 190658.000000, observed total counts = 198916.000000
[Mon Jul  9 17:13:15 2012] Offset between fit and detection position for source 1 = 0.000224 pixels
[Mon Jul  9 17:13:15 2012] 190655.000000 total counts/ 25600.000000 bgd. counts: snr = 1031.593750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000224 pixels
  Position = (281.3, 283.2) = 20 20 27.72 43 51 16.0
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 165055.0 +/- 436.6
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Mon Jul  9 17:13:15 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 17:13:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 17:13:15 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 17:13:15 2012] Source does appear to be extended
[Mon Jul  9 17:13:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 17:13:22 2012] Counts = 165055.000000, rescaling region sizes by 3.000000
[Mon Jul  9 17:13:22 2012] XMMSAS src. selection expression = ellipse(24426.568400, 24590.577800, 1203.863435, 1203.863435, 0.000000, X, Y)
[Mon Jul  9 17:13:22 2012] Writing source region out to fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  9 17:13:22 2012] Extracting stamp from image fullrun_pn_xmm0555470701_pi300-10000_cl_sm2.00.img.gz, (212, 214) - (351, 352)
[Mon Jul  9 17:13:22 2012] XMMSAS bgd. selection expression = annulus(24426.568400, 24590.577800, 6019.317173, 12038.634346, X, Y) && !ellipse(27992.028200, 37960.590980, 1838.008053, 403.952012, 285.165000, X, Y) && !ellipse(27726.446472, 36925.055664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.417000, 36453.692000, 1770.176051, 1770.176051, 0.000000, X, Y) && !ellipse(27354.907772, 35572.105104, 1640.976047, 433.101274, 106.463522, X, Y) && !ellipse(27210.394400, 35032.400600, 1640.976047, 400.979212, 106.206800, X, Y) && !ellipse(26959.172600, 34160.970000, 1295.032037, 1295.032037, 0.000000, X, Y) && !ellipse(26490.149600, 32269.986000, 854.968025, 854.968025, 0.000000, X, Y) && !ellipse(26746.390357, 33241.321494, 1123.079304, 486.726603, 90.000000, X, Y) && !ellipse(26528.874000, 32635.402000, 1475.608042, 1475.608042, 0.000000, X, Y) && !ellipse(26419.110963, 32069.476404, 1415.600041, 385.992440, 106.445403, X, Y) && !ellipse(26377.633222, 31877.737326, 1428.697423, 605.205443, 90.000000, X, Y) && !ellipse(25947.313600, 30185.812000, 1048.024030, 1048.024030, 0.000000, X, Y) && !ellipse(25811.812600, 29791.818000, 1833.216053, 501.875167, 286.022000, X, Y) && !ellipse(14296.790558, 29184.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.536438, 28925.924988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25514.582600, 28670.963440, 1570.336045, 403.357612, 106.227300, X, Y) && !ellipse(25435.426332, 28368.489714, 2248.112065, 426.436258, 105.571355, X, Y) && !ellipse(25254.956600, 27702.141800, 2248.112065, 429.448812, 105.652300, X, Y) && !ellipse(22246.858948, 23760.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23867.650787, 23356.711639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.159546, 23249.432526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.087830, 23494.149231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20949.586411, 22389.027802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24916.376740, 23132.621857, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 17:13:22 2012] Writing fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1.gif
[Mon Jul  9 17:13:53 2012] Mean detx,y = (41.39, -176.27) 
[Mon Jul  9 17:13:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 17:18:50 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 17:18:51 2012] Setting source spectrum file to fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 17:18:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  9 20:16:34 2012] Updating aperture counts using extracted products
[Mon Jul  9 20:16:34 2012] Error reading totcts from fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 20:16:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 20:16:34 2012] Using photon index=1.80, rate=8.33, arf fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 20:16:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 20:16:34 2012] Updating source flux to 2.5e-11
[Mon Jul  9 20:19:31 2012] Reading fit data from xmm0555470701/analysis//spectral/fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  9 20:19:31 2012] Spectral fit parameter nH value = 4.80184e+21
[Mon Jul  9 20:19:31 2012] Spectral fit parameter PhoIndex value = 2.65245
[Mon Jul  9 20:19:31 2012] Failed to get F(0.3-8.0) from xmm0555470701/analysis//spectral/fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 20:19:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 20:19:31 2012] Using Nh = 4.8e+21, photon index=2.65, rate=8.33, arf fullrun_pn_xmm0555470701_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 20:19:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 20:19:31 2012] Updating source flux to 2.8e-11