[Tue Mar  6 21:11:54 2012] Detection parameters:
  Position = (241.0, 343.2) = 6 48 27.25 -44 17 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.1 +/- 9.7
  Background counts = 17.1
  Rate = 0.001 +/- 0.0003

[Tue Mar  6 21:11:54 2012] Off-axis axis estimate = 5.28'
[Tue Mar  6 23:35:34 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 23:35:34 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Tue Mar  6 23:35:34 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Tue Mar  6 23:35:34 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.07"
[Wed Mar  7 00:33:08 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass0_src28.ximg exists
[Wed Mar  7 00:33:08 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Mar  7 00:33:08 2012] Fit fullrun_mos2_xmm0555460201_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed Mar  7 00:33:09 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Mar  7 00:33:09 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Mar  7 00:33:09 2012] Fit fullrun_mos2_xmm0555460201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Mar  7 00:33:29 2012] Source 26 is offset by 8.097274 and 5.862627 pixels which is larger than
2 X fitted extent = 1.705871 x 1.705871, not incorporating fit results
[Wed Mar  7 00:33:29 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 00:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 00:33:29 2012] Assessing source extent using major
[Wed Mar  7 00:33:29 2012] Source does appear to be extended
[Wed Mar  7 00:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 02:53:10 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 02:53:10 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Wed Mar  7 02:53:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Wed Mar  7 02:53:10 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 9.07"
[Wed Mar  7 03:43:10 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_src27.ximg exists
[Wed Mar  7 03:43:10 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Mar  7 03:43:10 2012] Fit fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_src27 appears to have run properly
[Wed Mar  7 03:43:10 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Mar  7 03:43:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Mar  7 03:43:10 2012] fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Mar  7 03:43:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Mar  7 03:43:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555460201_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 03:43:30 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.973408 pixels away
[Wed Mar  7 03:43:30 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 03:43:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 03:43:30 2012] Assessing source extent using major
[Wed Mar  7 03:43:30 2012] Source does appear to be extended
[Wed Mar  7 03:43:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 05:59:50 2012] XMMSAS src. selection expression = ellipse(20914.348862, 29808.804535, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar  7 05:59:50 2012] Writing source region out to fullrun_mos2_xmm0555460201_pi300-10000_pass1_cl_src26_src.reg
[Wed Mar  7 05:59:50 2012] Extracting stamp from image fullrun_mos2_xmm0555460201_pi300-10000_cl_sm2.00.img.gz, (203, 306) - (278, 381)
[Wed Mar  7 05:59:50 2012] XMMSAS bgd. selection expression = annulus(20914.348862, 29808.804535, 1087.500000, 2175.000000, X, Y)
[Wed Mar  7 05:59:50 2012] Writing fullrun_mos2_xmm0555460201_pi300-10000_pass1_cl_src26.gif
[Wed Mar  7 06:08:27 2012] Mean detx,y = (2742.17, 4555.77) 
[Wed Mar  7 06:08:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 06:08:48 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 06:08:48 2012] Setting source spectrum file to fullrun_mos2_xmm0555460201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Mar  7 06:08:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555460201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Mar  7 06:43:44 2012] Not generating rmf since there are only 43 counts
[Wed Mar  7 06:43:44 2012] rmf not generated due to insufficient counts
[Wed Mar  7 06:45:22 2012] Updating aperture counts using extracted products
[Wed Mar  7 06:45:22 2012] Error reading totcts from fullrun_mos2_xmm0555460201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Mar  7 06:45:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 06:45:22 2012] Using photon index=1.80, rate=0.00129, arf fullrun_mos2_xmm0555460201_pi300-10000_pass1_cl_src26.arf
[Wed Mar  7 06:45:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 06:45:22 2012] Updating source flux to 1.8e-14
[Wed Mar  7 06:46:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting