[Thu Apr  5 21:43:28 2012] Detection parameters:
  Position = (310.9, 317.6) = 16 47 10.29 -45 52 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3525.0 +/- 69.8
  Background counts = 31.7
  Rate = 0.1 +/- 0.002

[Thu Apr  5 21:43:28 2012] Off-axis axis estimate = 1.66'
[Thu Apr  5 22:15:47 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 22:15:47 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Apr  5 22:15:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Thu Apr  5 22:15:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Apr  5 22:31:05 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Apr  5 22:31:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 22:31:05 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Apr  5 22:31:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 22:31:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 22:31:05 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Apr  5 22:31:05 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Apr  5 22:31:05 2012] Fit fullrun_mos1_xmm0555350101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Apr  5 23:14:52 2012] Spatial fit model total counts = 3551.100000, observed total counts = 3665.000000
[Thu Apr  5 23:14:52 2012] Offset between fit and detection position for source 1 = 0.221487 pixels
[Thu Apr  5 23:14:52 2012] 3556.460000 total counts/ 1212.750000 bgd. counts: snr = 67.300491
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.221487 pixels
  Position = (310.7, 317.8) = 16 47 10.36 -45 52 18.5
  Extent = 4.8 (4.7-5.0)", rotation angle = 0
  Source counts = 2343.7 +/- 59.6
  Background counts = 1212.8
  Rate = 0.07 +/- 0.002
[Thu Apr  5 23:14:52 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 23:14:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 23:14:52 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 23:14:52 2012] Source does appear to be extended
[Thu Apr  5 23:14:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 23:44:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Apr  5 23:44:21 2012] Initial guess for spatial extent in simple fitting = 4.85"
[Thu Apr  5 23:44:21 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.863
[Thu Apr  5 23:44:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.85"
[Fri Apr  6 00:00:29 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Apr  6 00:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 00:00:29 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Apr  6 00:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 00:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 00:00:29 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Apr  6 00:00:29 2012] fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Apr  6 00:00:29 2012] Fit fullrun_mos1_xmm0555350101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Apr  6 00:24:27 2012] Spatial fit model total counts = 3559.120000, observed total counts = 3665.000000
[Fri Apr  6 00:24:27 2012] Offset between fit and detection position for source 1 = 0.005265 pixels
[Fri Apr  6 00:24:27 2012] 3558.640000 total counts/ 1229.420000 bgd. counts: snr = 66.429407
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005265 pixels
  Position = (310.7, 317.8) = 16 47 10.36 -45 52 18.5
  Extent = 4.8 (4.6-5.0)", rotation angle = 0
  Source counts = 2329.2 +/- 59.7
  Background counts = 1229.4
  Rate = 0.07 +/- 0.002
[Fri Apr  6 00:24:27 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 00:24:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 00:24:27 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 00:24:27 2012] Source does appear to be extended
[Fri Apr  6 00:24:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 01:33:54 2012] Counts = 2329.220000, rescaling region sizes by 2.000000
[Fri Apr  6 01:33:54 2012] XMMSAS src. selection expression = ellipse(26984.645200, 27598.932600, 579.404417, 579.404417, 0.000000, X, Y)
[Fri Apr  6 01:33:54 2012] Writing source region out to fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1_src.reg
[Fri Apr  6 01:33:54 2012] Extracting stamp from image fullrun_mos1_xmm0555350101_pi300-10000_cl_sm2.00.img.gz, (277, 284) - (344, 351)
[Fri Apr  6 01:33:54 2012] XMMSAS bgd. selection expression = annulus(26984.645200, 27598.932600, 1931.348056, 3862.696111, X, Y) && !ellipse(27143.019714, 26926.916260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28057.287020, 27487.442600, 421.680012, 421.680012, 0.000000, X, Y) && !ellipse(27894.924011, 28147.141174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26451.111115, 28165.853821, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Apr  6 01:33:54 2012] Writing fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1.gif
[Fri Apr  6 01:33:57 2012] Mean detx,y = (267.78, -283.58) 
[Fri Apr  6 01:33:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 01:34:09 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 01:34:09 2012] Setting source spectrum file to fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Apr  6 01:34:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Apr  6 02:03:57 2012] Updating aperture counts using extracted products
[Fri Apr  6 02:03:57 2012] Error reading totcts from fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Apr  6 02:03:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 02:03:57 2012] Using photon index=1.80, rate=0.0714, arf fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1.arf
[Fri Apr  6 02:03:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 02:03:57 2012] Updating source flux to 7.6e-13
[Fri Apr  6 02:04:09 2012] Reading fit data from xmm0555350101/analysis//spectral/fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Apr  6 02:04:09 2012] Spectral fit parameter nH value = 3.30118e+22
[Fri Apr  6 02:04:09 2012] Spectral fit parameter PhoIndex value = 3.95322
[Fri Apr  6 02:04:09 2012] Failed to get F(0.3-8.0) from xmm0555350101/analysis//spectral/fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Apr  6 02:04:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 02:04:09 2012] Using Nh = 3.3e+22, photon index=3.95, rate=0.0714, arf fullrun_mos1_xmm0555350101_pi300-10000_pass1_cl_src1.arf
[Fri Apr  6 02:04:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 02:04:09 2012] Updating source flux to 9.9e-13