[Fri Jun  7 05:43:33 2013] Detection parameters:
  Position = (287.6, 275.4) = 5 17 18.58 -35 23 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.9 +/- 21.7
  Background counts = 215.3
  Rate = 0.01 +/- 0.002

[Fri Jun  7 05:43:33 2013] Off-axis axis estimate = 1.84'
[Fri Jun  7 05:48:15 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 05:48:15 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Jun  7 05:48:15 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.303
[Fri Jun  7 05:48:15 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.35"
[Fri Jun  7 06:16:58 2013] fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  7 06:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_src3.csv
[Fri Jun  7 06:16:58 2013] fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  7 06:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_src3.csv
[Fri Jun  7 06:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 06:16:58 2013] fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  7 06:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  7 06:16:58 2013] fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  7 06:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  7 06:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 06:30:24 2013] Spatial fit model total counts = 2260.700000, observed total counts = 1878.000000
[Fri Jun  7 06:30:24 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 06:30:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 06:30:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 06:30:24 2013] Assessing source extent using major
[Fri Jun  7 06:30:24 2013] Source does appear to be extended
[Fri Jun  7 06:30:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 06:30:24 2013] Deleting source due to low Poisson probability 0.9