[Fri Jun  7 05:43:49 2013] Detection parameters:
  Position = (181.3, 371.7) = 5 17 56.33 -35 16 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 14.6
  Background counts = 44.3
  Rate = 0.008 +/- 0.002

[Fri Jun  7 05:43:49 2013] Off-axis axis estimate = 10.02'
[Fri Jun  7 06:16:58 2013] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 06:16:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 06:16:58 2013] Initial guess for spatial extent in simple fitting = 11.44"
[Fri Jun  7 06:16:58 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Fri Jun  7 06:16:58 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.44"
[Fri Jun  7 06:23:19 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun  7 06:23:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_src4.csv
[Fri Jun  7 06:23:19 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun  7 06:23:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_src4.csv
[Fri Jun  7 06:23:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 06:23:19 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun  7 06:23:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun  7 06:23:19 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun  7 06:23:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun  7 06:23:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555320301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 06:30:25 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.670052 pixels away
[Fri Jun  7 06:30:25 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 06:30:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 06:30:25 2013] Assessing source extent using major
[Fri Jun  7 06:30:25 2013] Source does appear to be extended
[Fri Jun  7 06:30:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 06:31:44 2013] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 06:31:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 06:31:44 2013] Initial guess for spatial extent in simple fitting = 11.44"
[Fri Jun  7 06:31:44 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Fri Jun  7 06:31:44 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.44"
[Fri Jun  7 06:39:00 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun  7 06:39:00 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun  7 06:39:00 2013] Fit fullrun_mos1_xmm0555320301_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jun  7 06:39:00 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun  7 06:39:00 2013] fullrun_mos1_xmm0555320301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun  7 06:39:00 2013] Fit fullrun_mos1_xmm0555320301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun  7 06:44:37 2013] Spatial fit model total counts = 125.665000, observed total counts = 115.000000
[Fri Jun  7 06:44:37 2013] Offset between fit and detection position for source 2 = 0.505373 pixels
[Fri Jun  7 06:44:37 2013] 126.602300 total counts/ 80.682400 bgd. counts: snr = 5.112243
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.505373 pixels
  Position = (181.5, 372.1) = 5 17 56.24 -35 16 7.8
  Extent = 12.1 (6.7-18.7)" x 5.1 (3.6-7.3)", rotation angle = 328 (299-352) degrees
  Source counts = 45.9 +/- 11.3
  Background counts = 80.7
  Rate = 0.005 +/- 0.001
[Fri Jun  7 06:44:37 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 06:44:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 06:44:37 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 06:44:37 2013] Source does appear to be extended
[Fri Jun  7 06:44:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Fri Jun  7 06:51:59 2013] XMMSAS src. selection expression = ellipse(15742.738400, 32327.305940, 726.576021, 306.896409, 327.563684, X, Y)
[Fri Jun  7 06:51:59 2013] Writing source region out to fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  7 06:51:59 2013] Extracting stamp from image fullrun_mos1_xmm0555320301_pi300-10000_cl_sm2.00.img.gz, (140, 330) - (223, 414)
[Fri Jun  7 06:51:59 2013] XMMSAS bgd. selection expression = annulus(15742.738400, 32327.305940, 1210.960035, 2421.920070, X, Y)
[Fri Jun  7 06:51:59 2013] Writing fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2.gif
[Fri Jun  7 06:54:30 2013] Mean detx,y = (619.26, 10491.68) 
[Fri Jun  7 06:54:32 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 06:54:54 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 06:54:54 2013] Setting source spectrum file to fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  7 06:54:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  7 06:59:26 2013] Not generating rmf since there are only 45 counts
[Fri Jun  7 06:59:26 2013] rmf not generated due to insufficient counts
[Fri Jun  7 07:06:50 2013] Updating aperture counts using extracted products
[Fri Jun  7 07:06:50 2013] Total counts from fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 62.00
[Fri Jun  7 07:06:50 2013] Total counts from fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 549.00
[Fri Jun  7 07:06:50 2013] Got source and background scale factors 704000.000000, 12763114.000000
[Fri Jun  7 07:06:50 2013] User source parameters:
  Position = (181.5, 372.1) = 5 17 56.24 -35 16 7.8
  Extent = 12.1 (6.7-18.7)" x 5.1 (3.6-7.3)", rotation angle = 328 (299-352) degrees
  Source aperture counts = 31.7 +/- 8.9
  Background aperture counts = 30.3
  Rate = 0.003 +/- 0.0009

[Fri Jun  7 07:06:50 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 07:06:50 2013] Using photon index=1.80, rate=0.00454, arf fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2.arf
[Fri Jun  7 07:06:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 07:06:50 2013] Updating source flux to 8.5e-14
[Fri Jun  7 07:06:51 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  7 07:06:52 2013] xmm0555320301/analysis//spectral/fullrun_mos1_xmm0555320301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete