[Fri Dec 23 19:32:36 2011] Detection parameters:
  Position = (306.2, 202.2) = 1 56 52.21 -17 8 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.9 +/- 24.1
  Background counts = 85.3
  Rate = 0.007 +/- 0.0006

[Fri Dec 23 19:32:36 2011] Off-axis axis estimate = 7.00'
[Fri Dec 23 19:39:37 2011] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:39:37 2011] Initial guess for spatial extent in simple fitting = 9.93"
[Fri Dec 23 19:39:37 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.163
[Fri Dec 23 19:39:37 2011] Giving source the simple spatial ID 54 for pass 0, mean size = 9.93"
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src54.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src54.csv
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src54.csv
[Fri Dec 23 22:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 22:44:22 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri Dec 23 22:44:22 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Dec 23 22:44:22 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Sat Dec 24 02:15:10 2011] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 13.315470 pixels away
[Sat Dec 24 02:15:11 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:11 2011] Assessing source extent using major
[Sat Dec 24 02:15:11 2011] Source does appear to be extended
[Sat Dec 24 02:15:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:16:02 2011] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 02:16:02 2011] Initial guess for spatial extent in simple fitting = 9.93"
[Sat Dec 24 02:16:02 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.163
[Sat Dec 24 02:16:02 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 9.93"
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src51.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src51.csv
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src51.csv
[Sat Dec 24 06:40:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 06:40:57 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Dec 24 06:40:57 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Dec 24 06:40:57 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sat Dec 24 09:50:02 2011] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 13.315470 pixels away
[Sat Dec 24 09:50:02 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:02 2011] Assessing source extent using major
[Sat Dec 24 09:50:02 2011] Source does appear to be extended
[Sat Dec 24 09:50:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 09:50:52 2011] XMMSAS src. selection expression = ellipse(26594.724304, 17543.955109, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 09:50:52 2011] Writing source region out to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src57_src.reg
[Sat Dec 24 09:50:52 2011] Extracting stamp from image fullrun_pn_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (269, 165) - (344, 240)
[Sat Dec 24 09:50:52 2011] XMMSAS bgd. selection expression = annulus(26594.724304, 17543.955109, 1087.500000, 2175.000000, X, Y) && !ellipse(28954.384247, 19627.863708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.504800, 17764.410400, 785.337623, 339.740810, 286.158803, X, Y) && !ellipse(24106.868200, 15900.999000, 554.769616, 554.769616, 0.000000, X, Y) && !ellipse(27901.954000, 15713.102800, 545.032016, 311.110409, 128.408544, X, Y)
[Sat Dec 24 09:50:52 2011] Writing fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src57.gif
[Sat Dec 24 11:33:23 2011] Mean detx,y = (-3637.97, -6535.67) 
[Sat Dec 24 11:33:30 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 11:34:14 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 11:34:15 2011] Setting source spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Dec 24 11:34:15 2011] Setting bgd. spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Dec 24 19:39:15 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 24 19:39:15 2011] rmf not generated due to insufficient counts
[Sat Dec 24 22:32:29 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:29 2011] Error reading totcts from fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Dec 24 22:32:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:33 2011] Using photon index=1.80, rate=0.00681, arf fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src57.arf
[Sat Dec 24 22:32:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:33 2011] Updating source flux to 2.6e-14
[Sat Dec 24 22:37:58 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting