[Fri Dec 23 19:32:35 2011] Detection parameters:
  Position = (350.1, 264.5) = 1 56 38.92 -17 3 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.4 +/- 17.0
  Background counts = 99.6
  Rate = 0.002 +/- 0.0004

[Fri Dec 23 19:32:36 2011] Off-axis axis estimate = 4.48'
[Fri Dec 23 19:39:37 2011] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:39:37 2011] Initial guess for spatial extent in simple fitting = 8.67"
[Fri Dec 23 19:39:37 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Fri Dec 23 19:39:37 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 8.67"
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src43.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src43.csv
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src43.csv
[Fri Dec 23 22:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 22:44:22 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Dec 23 22:44:22 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Dec 23 22:44:22 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sat Dec 24 02:15:10 2011] Spatial fit model total counts = 945.973000, observed total counts = 948.000000
[Sat Dec 24 02:15:10 2011] Offset between fit and detection position for source 46 = 3.058626 pixels
[Sat Dec 24 02:15:10 2011] 981.990000 total counts/ 622.692000 bgd. counts: snr = 14.398530
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 3.058626 pixels
  Position = (347.0, 264.4) = 1 56 39.85 -17 3 40.1
  Extent = 17.3 (17.3-34.7)", rotation angle = 0
  Source counts = 359.3 +/- 31.3
  Background counts = 622.7
  Rate = 0.005 +/- 0.0004
[Sat Dec 24 02:15:11 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:11 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 02:15:11 2011] Source does appear to be extended
[Sat Dec 24 02:15:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:16:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 24 02:16:02 2011] Initial guess for spatial extent in simple fitting = 17.34"
[Sat Dec 24 02:16:02 2011] source mask rpix=4.0, npix_max = 80, mask sum = 72, frac = 0.895
[Sat Dec 24 02:16:02 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 17.34"
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src42.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src42.csv
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src42.csv
[Sat Dec 24 06:40:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Dec 24 06:40:56 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Sat Dec 24 09:50:02 2011] Warning, spatial fit 42 centroid is now closest to src. 48
[Sat Dec 24 09:50:02 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:02 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 09:50:02 2011] Source does appear to be extended
[Sat Dec 24 09:50:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 09:50:51 2011] XMMSAS src. selection expression = ellipse(30140.102000, 22958.395000, 1040.238030, 1040.238030, 0.000000, X, Y)
[Sat Dec 24 09:50:51 2011] Writing source region out to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src46_src.reg
[Sat Dec 24 09:50:51 2011] Extracting stamp from image fullrun_pn_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (287, 205) - (407, 324)
[Sat Dec 24 09:50:52 2011] XMMSAS bgd. selection expression = annulus(30140.102000, 22958.395000, 1733.730050, 3467.460100, X, Y) && !ellipse(26068.489532, 25857.781097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31525.689480, 25607.096200, 387.160011, 387.160011, 0.000000, X, Y) && !ellipse(26157.905480, 24061.438000, 1121.008032, 1121.008032, 0.000000, X, Y) && !ellipse(29509.247400, 24666.151400, 413.862412, 413.862412, 0.000000, X, Y) && !ellipse(25499.700000, 24248.800000, 2288.384066, 2288.384066, 0.000000, X, Y) && !ellipse(31048.628200, 21797.597400, 353.872010, 353.872010, 0.000000, X, Y) && !ellipse(32213.745000, 21562.530600, 344.270410, 344.270410, 0.000000, X, Y) && !ellipse(28954.384247, 19627.863708, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 24 09:50:52 2011] Writing fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src46.gif
[Sat Dec 24 11:19:26 2011] Mean detx,y = (-5835.83, -362.02) 
[Sat Dec 24 11:19:35 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 11:21:32 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 11:21:33 2011] Setting source spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Dec 24 11:21:33 2011] Setting bgd. spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Dec 24 22:32:29 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:29 2011] Error reading totcts from fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Dec 24 22:32:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:32 2011] Using photon index=1.80, rate=0.00457, arf fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src46.arf
[Sat Dec 24 22:32:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:33 2011] Updating source flux to 1.5e-14