[Fri Dec 23 19:32:34 2011] Detection parameters:
  Position = (300.2, 297.8) = 1 56 54.05 -17 1 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 19.6
  Background counts = 131.9
  Rate = 0.001 +/- 0.0003

[Fri Dec 23 19:32:36 2011] Off-axis axis estimate = 0.14'
[Fri Dec 23 19:39:37 2011] Using EEF radius (= 6.50 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:39:37 2011] Initial guess for spatial extent in simple fitting = 6.50"
[Fri Dec 23 19:39:37 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.007
[Fri Dec 23 19:39:37 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 6.50"
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src29.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src29.csv
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src29.csv
[Fri Dec 23 22:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 22:44:21 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Dec 23 22:44:21 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Dec 23 22:44:21 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Dec 24 02:15:10 2011] Source 31 is offset by -5.778695 and -5.704585 pixels which is larger than
2 X fitted extent = 1.808901 x 1.808901, not incorporating fit results
[Sat Dec 24 02:15:11 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:11 2011] Assessing source extent using major
[Sat Dec 24 02:15:11 2011] Source does appear to be extended
[Sat Dec 24 02:15:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:16:02 2011] Using EEF radius (= 6.50 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 02:16:02 2011] Initial guess for spatial extent in simple fitting = 6.50"
[Sat Dec 24 02:16:02 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.007
[Sat Dec 24 02:16:02 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 6.50"
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src29.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src29.csv
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src29.csv
[Sat Dec 24 06:40:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Dec 24 06:40:56 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Dec 24 09:50:02 2011] Source 31 is offset by -5.778695 and -5.798056 pixels which is larger than
2 X fitted extent = 1.825085 x 1.825085, not incorporating fit results
[Sat Dec 24 09:50:02 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:02 2011] Assessing source extent using major
[Sat Dec 24 09:50:02 2011] Source does appear to be extended
[Sat Dec 24 09:50:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 09:50:02 2011] Source is confused with source 44
[Sat Dec 24 09:50:51 2011] XMMSAS src. selection expression = ellipse(26068.489532, 25857.781097, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 09:50:51 2011] Writing source region out to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src31_src.reg
[Sat Dec 24 09:50:51 2011] Extracting stamp from image fullrun_pn_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (263, 260) - (338, 335)
[Sat Dec 24 09:50:51 2011] XMMSAS bgd. selection expression = annulus(26068.489532, 25857.781097, 1087.500000, 2175.000000, X, Y) && !ellipse(25517.608800, 27429.836240, 426.126412, 426.126412, 0.000000, X, Y) && !ellipse(25448.856140, 26561.053223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23850.946200, 25686.462800, 549.040816, 549.040816, 0.000000, X, Y) && !ellipse(24706.848000, 24999.638000, 1146.360033, 1146.360033, 0.000000, X, Y) && !ellipse(26157.905480, 24061.438000, 1121.008032, 1121.008032, 0.000000, X, Y) && !ellipse(24048.628204, 24756.026245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24957.406000, 24869.444000, 1144.192033, 1144.192033, 0.000000, X, Y) && !ellipse(25499.700000, 24248.800000, 2288.384066, 2288.384066, 0.000000, X, Y)
[Sat Dec 24 09:50:51 2011] Writing fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src31.gif
[Sat Dec 24 10:57:53 2011] Mean detx,y = (-1179.63, 1416.34) 
[Sat Dec 24 10:58:00 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 10:58:41 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 10:58:42 2011] Setting source spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Dec 24 10:58:42 2011] Setting bgd. spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Dec 24 13:29:43 2011] Not generating rmf since there are only 85 counts
[Sat Dec 24 13:29:43 2011] rmf not generated due to insufficient counts
[Sat Dec 24 22:32:28 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:28 2011] Error reading totcts from fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Dec 24 22:32:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:32 2011] Using photon index=1.80, rate=0.00141, arf fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src31.arf
[Sat Dec 24 22:32:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:32 2011] Updating source flux to 3.9e-15
[Sat Dec 24 22:37:58 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting