[Fri Dec 23 19:32:33 2011] Detection parameters:
  Position = (268.4, 352.1) = 1 57 3.70 -16 57 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 259.1 +/- 25.1
  Background counts = 118.3
  Rate = 0.005 +/- 0.0005

[Fri Dec 23 19:32:36 2011] Off-axis axis estimate = 4.46'
[Fri Dec 23 19:39:37 2011] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:39:37 2011] Initial guess for spatial extent in simple fitting = 8.66"
[Fri Dec 23 19:39:37 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008
[Fri Dec 23 19:39:37 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 8.66"
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src19.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 22:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 22:44:21 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Dec 23 22:44:21 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Dec 23 22:44:21 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Dec 23 22:44:21 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Dec 23 22:44:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 02:15:10 2011] Source 21 is offset by -5.193360 and 5.583919 pixels which is larger than
2 X fitted extent = 1.289172 x 1.289172, not incorporating fit results
[Sat Dec 24 02:15:11 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:11 2011] Assessing source extent using major
[Sat Dec 24 02:15:11 2011] Source does appear to be extended
[Sat Dec 24 02:15:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:16:02 2011] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 02:16:02 2011] Initial guess for spatial extent in simple fitting = 8.66"
[Sat Dec 24 02:16:02 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008
[Sat Dec 24 02:16:02 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 8.66"
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src19.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src19.csv
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Dec 24 06:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src19.csv
[Sat Dec 24 06:40:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Dec 24 06:40:56 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Dec 24 09:50:02 2011] Spatial fit model total counts = 1857.720000, observed total counts = 1988.000000
[Sat Dec 24 09:50:02 2011] Offset between fit and detection position for source 21 = 6.771008 pixels
[Sat Dec 24 09:50:02 2011] 2194.072000 total counts/ 652.192000 bgd. counts: snr = 60.375792
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 6.771008 pixels
  Position = (264.1, 346.8) = 1 57 4.98 -16 57 41.9
  Extent = 17.3 (17.3-34.6)", rotation angle = 0
  Source counts = 1541.9 +/- 46.8
  Background counts = 652.2
  Rate = 0.02 +/- 0.0006
[Sat Dec 24 09:50:02 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:02 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 09:50:02 2011] Source does appear to be extended
[Sat Dec 24 09:50:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 09:50:50 2011] Counts = 1541.880000, rescaling region sizes by 2.000000
[Sat Dec 24 09:50:50 2011] XMMSAS src. selection expression = ellipse(22930.460000, 30122.608000, 2077.956060, 2077.956060, 0.000000, X, Y)
[Sat Dec 24 09:50:50 2011] Writing source region out to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src21_src.reg
[Sat Dec 24 09:50:50 2011] Extracting stamp from image fullrun_pn_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (145, 227) - (384, 466)
[Sat Dec 24 09:50:50 2011] XMMSAS bgd. selection expression = annulus(22930.460000, 30122.608000, 6926.520199, 13853.040399, X, Y) && !ellipse(25517.608800, 27429.836240, 426.126412, 426.126412, 0.000000, X, Y) && !ellipse(15303.277649, 30901.075623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11456.310000, 28948.680000, 393.950411, 393.950411, 0.000000, X, Y) && !ellipse(19908.776200, 25583.712600, 390.328811, 390.328811, 0.000000, X, Y) && !ellipse(22143.509120, 32220.500600, 555.112016, 555.112016, 0.000000, X, Y) && !ellipse(24350.839569, 36220.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37496.324000, 36063.639400, 2026.576058, 2026.576058, 0.000000, X, Y) && !ellipse(36335.655200, 35289.684600, 1577.152045, 556.902416, 92.818299, X, Y) && !ellipse(32140.521400, 34315.691000, 413.079212, 413.079212, 0.000000, X, Y) && !ellipse(24282.266600, 32438.678800, 442.228813, 442.228813, 0.000000, X, Y) && !ellipse(28923.199916, 32077.311800, 462.126413, 462.126413, 0.000000, X, Y) && !ellipse(17873.125000, 31888.300000, 643.644819, 643.644819, 0.000000, X, Y) && !ellipse(25395.578000, 31253.491960, 488.640014, 488.640014, 0.000000, X, Y) && !ellipse(23620.480835, 31209.244873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21692.364460, 30994.661800, 622.360818, 622.360818, 0.000000, X, Y) && !ellipse(11768.933182, 30836.563721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35514.318000, 29795.216800, 397.826411, 397.826411, 0.000000, X, Y) && !ellipse(12015.711517, 29899.173767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31825.370972, 28553.989899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19351.883626, 28138.315200, 782.015223, 782.015223, 0.000000, X, Y) && !ellipse(22493.082000, 27393.193800, 803.632023, 803.632023, 0.000000, X, Y) && !ellipse(25448.856140, 26561.053223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37300.989227, 26338.166168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22206.440000, 26296.924000, 1252.384036, 1252.384036, 0.000000, X, Y) && !ellipse(26068.489532, 25857.781097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22918.775177, 25411.332611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19548.369476, 25728.125397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31525.689480, 25607.096200, 387.160011, 387.160011, 0.000000, X, Y) && !ellipse(20210.139511, 24974.070526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23850.946200, 25686.462800, 549.040816, 549.040816, 0.000000, X, Y) && !ellipse(24706.848000, 24999.638000, 1146.360033, 1146.360033, 0.000000, X, Y) && !ellipse(26157.905480, 24061.438000, 1121.008032, 1121.008032, 0.000000, X, Y) && !ellipse(29509.247400, 24666.151400, 413.862412, 413.862412, 0.000000, X, Y) && !ellipse(24048.628204, 24756.026245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24957.406000, 24869.444000, 1144.192033, 1144.192033, 0.000000, X, Y) && !ellipse(25499.700000, 24248.800000, 2288.384066, 2288.384066, 0.000000, X, Y) && !ellipse(15759.785000, 23273.578400, 550.394416, 550.394416, 0.000000, X, Y) && !ellipse(30140.102000, 22958.395000, 1386.984040, 1386.984040, 0.000000, X, Y) && !ellipse(31048.628200, 21797.597400, 353.872010, 353.872010, 0.000000, X, Y) && !ellipse(32213.745000, 21562.530600, 344.270410, 344.270410, 0.000000, X, Y) && !ellipse(22278.356705, 20044.091697, 1492.392043, 853.127458, 94.588729, X, Y) && !ellipse(28954.384247, 19627.863708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.504800, 17764.410400, 785.337623, 339.740810, 286.158803, X, Y) && !ellipse(26594.724304, 17543.955109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33052.852081, 17252.094376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31876.711273, 16838.063797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29920.172000, 16102.702400, 720.337926, 720.337926, 0.000000, X, Y) && !ellipse(24106.868200, 15900.999000, 554.769616, 554.769616, 0.000000, X, Y) && !ellipse(32345.623962, 15855.721542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32925.154000, 15934.851880, 347.183210, 347.183210, 0.000000, X, Y) && !ellipse(30163.394318, 37508.588623, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 24 09:50:50 2011] Writing fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src21.gif
[Sat Dec 24 10:33:50 2011] Mean detx,y = (2701.77, 5070.59) 
[Sat Dec 24 10:34:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 10:45:25 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 10:45:26 2011] Setting source spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Dec 24 10:45:26 2011] Setting bgd. spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Dec 24 22:32:27 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:27 2011] Error reading totcts from fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Dec 24 22:32:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:31 2011] Using photon index=1.80, rate=0.0196, arf fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src21.arf
[Sat Dec 24 22:32:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:31 2011] Updating source flux to 5.6e-14
[Sat Dec 24 22:37:58 2011] Flag b found in src. 21 procflags, skipping spectral fitting