[Fri Dec 23 19:32:33 2011] Detection parameters:
  Position = (294.0, 315.9) = 1 56 55.92 -16 59 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2864.1 +/- 66.8
  Background counts = 132.3
  Rate = 0.05 +/- 0.001

[Fri Dec 23 19:32:36 2011] Off-axis axis estimate = 1.31'
[Fri Dec 23 19:39:36 2011] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:39:36 2011] Initial guess for spatial extent in simple fitting = 7.08"
[Fri Dec 23 19:39:36 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.883
[Fri Dec 23 19:39:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.08"
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src1.csv
[Fri Dec 23 22:44:20 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 23 22:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src1.csv
[Fri Dec 23 22:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 22:44:21 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 23 22:44:21 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 23 22:44:21 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Dec 24 02:15:10 2011] Spatial fit model total counts = 3849.960000, observed total counts = 3846.000000
[Sat Dec 24 02:15:10 2011] Offset between fit and detection position for source 1 = 0.169846 pixels
[Sat Dec 24 02:15:10 2011] 3839.950000 total counts/ 1892.250000 bgd. counts: snr = 44.774713
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.169846 pixels
  Position = (293.9, 315.8) = 1 56 55.96 -16 59 56.6
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1947.7 +/- 62.0
  Background counts = 1892.2
  Rate = 0.02 +/- 0.0008
[Sat Dec 24 02:15:11 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:11 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 02:15:11 2011] Source does appear to be extended
[Sat Dec 24 02:15:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:16:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 24 02:16:02 2011] Initial guess for spatial extent in simple fitting = 5.37"
[Sat Dec 24 02:16:02 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.331
[Sat Dec 24 02:16:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.37"
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Dec 24 06:40:55 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Dec 24 06:40:55 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Dec 24 06:40:56 2011] fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Dec 24 06:40:56 2011] Fit fullrun_pn_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Dec 24 09:50:02 2011] Spatial fit model total counts = 3877.050000, observed total counts = 3879.000000
[Sat Dec 24 09:50:02 2011] Offset between fit and detection position for source 1 = 0.006528 pixels
[Sat Dec 24 09:50:02 2011] 3873.220000 total counts/ 1937.410000 bgd. counts: snr = 43.979669
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006528 pixels
  Position = (293.9, 315.8) = 1 56 55.97 -16 59 56.6
  Extent = 5.3 (5.1-5.6)", rotation angle = 0
  Source counts = 1935.8 +/- 62.2
  Background counts = 1937.4
  Rate = 0.02 +/- 0.0008
[Sat Dec 24 09:50:02 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:02 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 09:50:02 2011] Source does appear to be extended
[Sat Dec 24 09:50:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 09:50:49 2011] Counts = 1935.810000, rescaling region sizes by 2.000000
[Sat Dec 24 09:50:49 2011] XMMSAS src. selection expression = ellipse(25517.608800, 27429.836240, 639.189618, 639.189618, 0.000000, X, Y)
[Sat Dec 24 09:50:49 2011] Writing source region out to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1_src.reg
[Sat Dec 24 09:50:49 2011] Extracting stamp from image fullrun_pn_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (257, 279) - (331, 353)
[Sat Dec 24 09:50:49 2011] XMMSAS bgd. selection expression = annulus(25517.608800, 27429.836240, 2130.632061, 4261.264123, X, Y) && !ellipse(22143.509120, 32220.500600, 555.112016, 555.112016, 0.000000, X, Y) && !ellipse(28923.199916, 32077.311800, 462.126413, 462.126413, 0.000000, X, Y) && !ellipse(25395.578000, 31253.491960, 488.640014, 488.640014, 0.000000, X, Y) && !ellipse(23620.480835, 31209.244873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21692.364460, 30994.661800, 622.360818, 622.360818, 0.000000, X, Y) && !ellipse(22930.460000, 30122.608000, 1385.304040, 1385.304040, 0.000000, X, Y) && !ellipse(22493.082000, 27393.193800, 803.632023, 803.632023, 0.000000, X, Y) && !ellipse(25448.856140, 26561.053223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22206.440000, 26296.924000, 1252.384036, 1252.384036, 0.000000, X, Y) && !ellipse(26068.489532, 25857.781097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22918.775177, 25411.332611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23850.946200, 25686.462800, 549.040816, 549.040816, 0.000000, X, Y) && !ellipse(24706.848000, 24999.638000, 1146.360033, 1146.360033, 0.000000, X, Y) && !ellipse(26157.905480, 24061.438000, 1121.008032, 1121.008032, 0.000000, X, Y) && !ellipse(29509.247400, 24666.151400, 413.862412, 413.862412, 0.000000, X, Y) && !ellipse(24048.628204, 24756.026245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24957.406000, 24869.444000, 1144.192033, 1144.192033, 0.000000, X, Y) && !ellipse(25499.700000, 24248.800000, 2288.384066, 2288.384066, 0.000000, X, Y) && !ellipse(30140.102000, 22958.395000, 1386.984040, 1386.984040, 0.000000, X, Y)
[Sat Dec 24 09:50:49 2011] Writing fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1.gif
[Sat Dec 24 09:51:24 2011] Mean detx,y = (-328.86, 2852.47) 
[Sat Dec 24 09:51:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 09:52:30 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 09:52:30 2011] Setting source spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 24 09:52:30 2011] Setting bgd. spectrum file to fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Dec 24 22:32:26 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:26 2011] Error reading totcts from fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 24 22:32:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:30 2011] Using photon index=1.80, rate=0.0246, arf fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1.arf
[Sat Dec 24 22:32:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:30 2011] Updating source flux to 6.8e-14
[Sat Dec 24 22:48:23 2011] Reading fit data from xmm0555220201/analysis//spectral/fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Dec 24 22:48:23 2011] Spectral fit parameter nH value = 1.26006e+20
[Sat Dec 24 22:48:23 2011] Spectral fit parameter PhoIndex value = 1.99304
[Sat Dec 24 22:48:23 2011] Failed to get F(0.3-8.0) from xmm0555220201/analysis//spectral/fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Dec 24 22:48:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:48:23 2011] Using Nh = 1.3e+20, photon index=1.99, rate=0.0246, arf fullrun_pn_xmm0555220201_pi300-10000_pass1_cl_src1.arf
[Sat Dec 24 22:48:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:48:23 2011] Updating source flux to 6.2e-14