[Fri Dec 23 19:34:14 2011] Detection parameters:
  Position = (286.8, 279.6) = 1 56 58.11 -17 2 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.5 +/- 13.6
  Background counts = 47.1
  Rate = 0.0007 +/- 0.0002

[Fri Dec 23 19:34:14 2011] Off-axis axis estimate = 1.61'
[Sat Dec 24 00:24:33 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 00:24:33 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Dec 24 00:24:33 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.069
[Sat Dec 24 00:24:33 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 7.23"
[Sat Dec 24 02:14:46 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass0_src42.ximg exists
[Sat Dec 24 02:14:46 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Dec 24 02:14:46 2011] Fit fullrun_mos2_xmm0555220201_pi300-10000_cl_pass0_src42 appears to have run properly
[Sat Dec 24 02:14:47 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Dec 24 02:14:47 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Dec 24 02:14:47 2011] Fit fullrun_mos2_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sat Dec 24 02:15:36 2011] Spatial fit model total counts = 739.371000, observed total counts = 742.000000
[Sat Dec 24 02:15:36 2011] Offset between fit and detection position for source 37 = 4.468522 pixels
[Sat Dec 24 02:15:36 2011] 753.132000 total counts/ 666.614000 bgd. counts: snr = 3.350960
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 4.468522 pixels
  Position = (283.0, 277.2) = 1 56 59.27 -17 2 44.5
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 86.5 +/- 27.4
  Background counts = 666.6
  Rate = 0.001 +/- 0.0003
[Sat Dec 24 02:15:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 02:15:36 2011] Source does appear to be extended
[Sat Dec 24 02:15:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 08:06:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 24 08:06:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 08:06:57 2011] Initial guess for spatial extent in simple fitting = 14.46"
[Sat Dec 24 08:06:57 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.094
[Sat Dec 24 08:06:57 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 14.46"
[Sat Dec 24 09:49:42 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_src41.ximg exists
[Sat Dec 24 09:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_src41.csv
[Sat Dec 24 09:49:42 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Dec 24 09:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_src41.csv
[Sat Dec 24 09:49:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 09:49:43 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Dec 24 09:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Dec 24 09:49:43 2011] fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Dec 24 09:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Dec 24 09:49:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 09:50:24 2011] Warning, spatial fit 41 centroid is now closest to src. 33
[Sat Dec 24 09:50:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:24 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 09:50:24 2011] Source does appear to be extended
[Sat Dec 24 09:50:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 21:11:00 2011] XMMSAS src. selection expression = ellipse(24571.730000, 24070.444000, 867.852025, 867.852025, 0.000000, X, Y)
[Sat Dec 24 21:11:00 2011] Writing source region out to fullrun_mos2_xmm0555220201_pi300-10000_pass1_cl_src37_src.reg
[Sat Dec 24 21:11:00 2011] Extracting stamp from image fullrun_mos2_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (233, 227) - (333, 327)
[Sat Dec 24 21:11:00 2011] XMMSAS bgd. selection expression = annulus(24571.730000, 24070.444000, 1446.420042, 2892.840083, X, Y) && !ellipse(23832.777400, 25687.814280, 297.445609, 297.445609, 0.000000, X, Y) && !ellipse(24506.766785, 25436.751862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23323.303406, 25786.267883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25254.282318, 24990.104248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24821.719464, 22222.060047, 432.647061, 307.828357, 327.037731, X, Y) && !ellipse(25333.182000, 25839.508800, 1090.136031, 1090.136031, 0.000000, X, Y)
[Sat Dec 24 21:11:00 2011] Writing fullrun_mos2_xmm0555220201_pi300-10000_pass1_cl_src37.gif
[Sat Dec 24 21:30:56 2011] Mean detx,y = (311.68, 384.70) 
[Sat Dec 24 21:30:58 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 21:31:15 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 21:31:15 2011] Setting source spectrum file to fullrun_mos2_xmm0555220201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Dec 24 21:31:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0555220201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Dec 24 22:30:20 2011] Not generating rmf since there are only 86 counts
[Sat Dec 24 22:30:20 2011] rmf not generated due to insufficient counts
[Sat Dec 24 22:32:40 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:41 2011] Error reading totcts from fullrun_mos2_xmm0555220201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Dec 24 22:32:43 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:43 2011] Using photon index=1.80, rate=0.00105, arf fullrun_mos2_xmm0555220201_pi300-10000_pass1_cl_src37.arf
[Sat Dec 24 22:32:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:43 2011] Updating source flux to 9.5e-15
[Sat Dec 24 22:35:33 2011] Source 37 has fewer than 100.000000 counts, skipping spectral fitting