[Fri Dec 23 19:33:31 2011] Detection parameters:
  Position = (255.0, 208.1) = 1 57 7.75 -17 7 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.0 +/- 11.2
  Background counts = 31.6
  Rate = 0.0007 +/- 0.0002

[Fri Dec 23 19:33:31 2011] Off-axis axis estimate = 7.26'
[Fri Dec 23 22:44:22 2011] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:44:22 2011] Initial guess for spatial extent in simple fitting = 10.06"
[Fri Dec 23 22:44:22 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Fri Dec 23 22:44:22 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 10.06"
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src32.ximg exists
[Sat Dec 24 00:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src32.csv
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src32_1.ximg exists
[Sat Dec 24 00:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src32.csv
[Sat Dec 24 00:24:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sat Dec 24 00:24:33 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Sat Dec 24 02:15:24 2011] Source 32 is offset by -5.144590 and -6.487828 pixels which is larger than
2 X fitted extent = 1.156326 x 1.156326, not incorporating fit results
[Sat Dec 24 02:15:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:24 2011] Assessing source extent using major
[Sat Dec 24 02:15:24 2011] Source does appear to be extended
[Sat Dec 24 02:15:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 06:40:57 2011] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 06:40:57 2011] Initial guess for spatial extent in simple fitting = 10.06"
[Sat Dec 24 06:40:57 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Sat Dec 24 06:40:57 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 10.06"
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src32.ximg exists
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Dec 24 08:06:57 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src32 appears to have run properly
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Dec 24 08:06:57 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sat Dec 24 09:50:12 2011] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.525697 pixels away
[Sat Dec 24 09:50:12 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:12 2011] Assessing source extent using major
[Sat Dec 24 09:50:12 2011] Source does appear to be extended
[Sat Dec 24 09:50:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 19:57:31 2011] XMMSAS src. selection expression = ellipse(22140.604675, 18059.895004, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 19:57:31 2011] Writing source region out to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src32_src.reg
[Sat Dec 24 19:57:31 2011] Extracting stamp from image fullrun_mos1_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (218, 171) - (293, 246)
[Sat Dec 24 19:57:31 2011] XMMSAS bgd. selection expression = annulus(22140.604675, 18059.895004, 1087.500000, 2175.000000, X, Y) && !ellipse(23987.719588, 15879.355989, 653.911273, 447.087584, 357.323055, X, Y)
[Sat Dec 24 19:57:31 2011] Writing fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src32.gif
[Sat Dec 24 20:15:58 2011] Mean detx,y = (7185.07, 479.64) 
[Sat Dec 24 20:16:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 20:16:42 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 20:16:42 2011] Setting source spectrum file to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Dec 24 20:16:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Dec 24 21:10:34 2011] Not generating rmf since there are only 43 counts
[Sat Dec 24 21:10:34 2011] rmf not generated due to insufficient counts
[Sat Dec 24 22:32:36 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:36 2011] Error reading totcts from fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Dec 24 22:32:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:38 2011] Using photon index=1.80, rate=0.000739, arf fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src32.arf
[Sat Dec 24 22:32:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:38 2011] Updating source flux to 9.2e-15
[Sat Dec 24 22:32:46 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting