[Fri Dec 23 19:33:31 2011] Detection parameters:
  Position = (429.3, 303.9) = 1 56 14.88 -17 0 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.9 +/- 12.0
  Background counts = 26.9
  Rate = 0.0008 +/- 0.0001

[Fri Dec 23 19:33:31 2011] Off-axis axis estimate = 9.50'
[Fri Dec 23 22:44:22 2011] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:44:22 2011] Initial guess for spatial extent in simple fitting = 11.18"
[Fri Dec 23 22:44:22 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.955
[Fri Dec 23 22:44:22 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 11.18"
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src29.ximg exists
[Sat Dec 24 00:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src29.csv
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Dec 24 00:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src29.csv
[Sat Dec 24 00:24:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Dec 24 00:24:33 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Dec 24 02:15:24 2011] Source 26 is offset by -8.787863 and 3.472098 pixels which is larger than
2 X fitted extent = 1.284768 x 1.284768, not incorporating fit results
[Sat Dec 24 02:15:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:24 2011] Assessing source extent using major
[Sat Dec 24 02:15:24 2011] Source does appear to be extended
[Sat Dec 24 02:15:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 06:40:57 2011] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 06:40:57 2011] Initial guess for spatial extent in simple fitting = 11.18"
[Sat Dec 24 06:40:57 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.955
[Sat Dec 24 06:40:57 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 11.18"
[Sat Dec 24 08:06:56 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src29.ximg exists
[Sat Dec 24 08:06:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src29.csv
[Sat Dec 24 08:06:56 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Dec 24 08:06:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src29.csv
[Sat Dec 24 08:06:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Dec 24 08:06:57 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Dec 24 09:50:12 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.310673 pixels away
[Sat Dec 24 09:50:12 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:12 2011] Assessing source extent using major
[Sat Dec 24 09:50:12 2011] Source does appear to be extended
[Sat Dec 24 09:50:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 19:57:31 2011] XMMSAS src. selection expression = ellipse(37302.807922, 26393.592560, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 19:57:31 2011] Writing source region out to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src26_src.reg
[Sat Dec 24 19:57:31 2011] Extracting stamp from image fullrun_mos1_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (392, 266) - (467, 341)
[Sat Dec 24 19:57:31 2011] XMMSAS bgd. selection expression = annulus(37302.807922, 26393.592560, 1087.500000, 2175.000000, X, Y)
[Sat Dec 24 19:57:31 2011] Writing fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src26.gif
[Sat Dec 24 20:14:31 2011] Mean detx,y = (-4480.05, -12329.86) 
[Sat Dec 24 20:14:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 20:14:49 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 20:14:49 2011] Setting source spectrum file to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Dec 24 20:14:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Dec 24 21:10:22 2011] Not generating rmf since there are only 63 counts
[Sat Dec 24 21:10:22 2011] rmf not generated due to insufficient counts
[Sat Dec 24 22:32:36 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:36 2011] Error reading totcts from fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Dec 24 22:32:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:38 2011] Using photon index=1.80, rate=0.000773, arf fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src26.arf
[Sat Dec 24 22:32:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:38 2011] Updating source flux to 1.7e-14
[Sat Dec 24 22:32:46 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting