[Fri Dec 23 19:33:29 2011] Detection parameters:
  Position = (227.9, 295.9) = 1 57 15.97 -17 1 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1813.1 +/- 52.1
  Background counts = 45.6
  Rate = 0.02 +/- 0.0007

[Fri Dec 23 19:33:31 2011] Off-axis axis estimate = 5.12'
[Fri Dec 23 22:44:22 2011] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:44:22 2011] Initial guess for spatial extent in simple fitting = 8.99"
[Fri Dec 23 22:44:22 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.949
[Fri Dec 23 22:44:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.99"
[Sat Dec 24 00:24:32 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Dec 24 00:24:32 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Dec 24 00:24:32 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Dec 24 00:24:33 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Dec 24 00:24:33 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Dec 24 02:15:24 2011] Spatial fit model total counts = 2018.260000, observed total counts = 2025.000000
[Sat Dec 24 02:15:24 2011] Offset between fit and detection position for source 1 = 0.073166 pixels
[Sat Dec 24 02:15:24 2011] 2025.389000 total counts/ 819.179000 bgd. counts: snr = 42.143783
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.073166 pixels
  Position = (227.8, 295.8) = 1 57 15.99 -17 1 23.6
  Extent = 4.9 (4.6-5.1)", rotation angle = 0
  Source counts = 1206.2 +/- 45.0
  Background counts = 819.2
  Rate = 0.01 +/- 0.0005
[Sat Dec 24 02:15:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:15:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:15:24 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 02:15:24 2011] Source does appear to be extended
[Sat Dec 24 02:15:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 06:40:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 24 06:40:57 2011] Initial guess for spatial extent in simple fitting = 4.88"
[Sat Dec 24 06:40:57 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.856
[Sat Dec 24 06:40:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.88"
[Sat Dec 24 08:06:56 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Dec 24 08:06:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src1.csv
[Sat Dec 24 08:06:56 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Dec 24 08:06:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src1.csv
[Sat Dec 24 08:06:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Dec 24 08:06:57 2011] fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Dec 24 08:06:57 2011] Fit fullrun_mos1_xmm0555220201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Dec 24 09:50:12 2011] Spatial fit model total counts = 1951.010000, observed total counts = 1951.000000
[Sat Dec 24 09:50:12 2011] Offset between fit and detection position for source 1 = 0.003939 pixels
[Sat Dec 24 09:50:12 2011] 1951.126000 total counts/ 743.406000 bgd. counts: snr = 44.294849
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003939 pixels
  Position = (227.8, 295.8) = 1 57 15.99 -17 1 23.6
  Extent = 4.9 (4.6-5.1)", rotation angle = 0
  Source counts = 1207.7 +/- 44.2
  Background counts = 743.4
  Rate = 0.01 +/- 0.0005
[Sat Dec 24 09:50:12 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:50:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:50:12 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 09:50:12 2011] Source does appear to be extended
[Sat Dec 24 09:50:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 19:57:31 2011] Counts = 1207.720000, rescaling region sizes by 2.000000
[Sat Dec 24 19:57:31 2011] XMMSAS src. selection expression = ellipse(19773.693140, 25688.779000, 582.951617, 582.951617, 0.000000, X, Y)
[Sat Dec 24 19:57:31 2011] Writing source region out to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1_src.reg
[Sat Dec 24 19:57:31 2011] Extracting stamp from image fullrun_mos1_xmm0555220201_pi300-10000_cl_sm2.00.img.gz, (194, 262) - (261, 329)
[Sat Dec 24 19:57:31 2011] XMMSAS bgd. selection expression = annulus(19773.693140, 25688.779000, 1943.172056, 3886.344112, X, Y) && !ellipse(23899.627682, 25666.410629, 836.936024, 786.763866, 116.056968, X, Y) && !ellipse(20198.607800, 24752.648800, 301.468809, 301.468809, 0.000000, X, Y) && !ellipse(22740.802000, 29918.052000, 1382.808040, 1382.808040, 0.000000, X, Y) && !ellipse(19370.945816, 28162.970459, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 24 19:57:31 2011] Writing fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1.gif
[Sat Dec 24 19:57:41 2011] Mean detx,y = (232.24, 4553.81) 
[Sat Dec 24 19:57:44 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 19:59:10 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 19:59:10 2011] Setting source spectrum file to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 24 19:59:10 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Dec 24 22:32:34 2011] Updating aperture counts using extracted products
[Sat Dec 24 22:32:34 2011] Error reading totcts from fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 24 22:32:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:32:36 2011] Using photon index=1.80, rate=0.0146, arf fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1.arf
[Sat Dec 24 22:32:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:32:36 2011] Updating source flux to 1.5e-13
[Sat Dec 24 22:35:33 2011] Reading fit data from xmm0555220201/analysis//spectral/fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Dec 24 22:35:33 2011] Spectral fit parameter nH value = 1.67634e+13
[Sat Dec 24 22:35:33 2011] Spectral fit parameter PhoIndex value = 1.84143
[Sat Dec 24 22:35:33 2011] Failed to get F(0.3-8.0) from xmm0555220201/analysis//spectral/fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Dec 24 22:35:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 22:35:33 2011] Using Nh = 1.7e+13, photon index=1.84, rate=0.0146, arf fullrun_mos1_xmm0555220201_pi300-10000_pass1_cl_src1.arf
[Sat Dec 24 22:35:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 22:35:33 2011] Updating source flux to 1.5e-13