[Tue Jul 10 03:38:07 2012] Detection parameters:
  Position = (114.2, 310.8) = 6 1 4.03 -50 24 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.8 +/- 16.0
  Background counts = 55.2
  Rate = 0.0007 +/- 0.0001

[Tue Jul 10 03:38:07 2012] Off-axis axis estimate = 13.39'
[Tue Jul 10 06:15:10 2012] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 06:15:10 2012] Initial guess for spatial extent in simple fitting = 13.12"
[Tue Jul 10 06:15:10 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Tue Jul 10 06:15:10 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 13.12"
[Tue Jul 10 06:56:27 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass0_src40.ximg exists
[Tue Jul 10 06:56:27 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass0_src40_1.ximg exists
[Tue Jul 10 06:56:27 2012] Fit fullrun_mos2_xmm0555170501_pi300-10000_cl_pass0_src40 appears to have run properly
[Tue Jul 10 06:56:28 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Tue Jul 10 06:56:28 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Tue Jul 10 06:56:28 2012] Fit fullrun_mos2_xmm0555170501_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Tue Jul 10 06:56:39 2012] Spatial fit model total counts = 818.507000, observed total counts = 817.000000
[Tue Jul 10 06:56:39 2012] Offset between fit and detection position for source 29 = 8.424894 pixels
[Tue Jul 10 06:56:39 2012] 815.944000 total counts/ 518.592000 bgd. counts: snr = 13.057438
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 8.424894 pixels
  Position = (107.6, 316.0) = 6 1 7.00 -50 24 18.7
  Extent = 26.2 (21.3-52.5)", rotation angle = 0
  Source counts = 297.4 +/- 28.6
  Background counts = 518.6
  Rate = 0.002 +/- 0.0002
[Tue Jul 10 06:56:39 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 06:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 06:56:39 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 06:56:39 2012] Source does appear to be extended
[Tue Jul 10 06:56:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:21:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 07:21:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 10 07:21:18 2012] Initial guess for spatial extent in simple fitting = 26.25"
[Tue Jul 10 07:21:18 2012] source mask rpix=6.0, npix_max = 170, mask sum = 169, frac = 0.990
[Tue Jul 10 07:21:18 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 26.25"
[Tue Jul 10 08:04:53 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_src37.ximg exists
[Tue Jul 10 08:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_src37.csv
[Tue Jul 10 08:04:53 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Jul 10 08:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_src37.csv
[Tue Jul 10 08:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 08:04:54 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Jul 10 08:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Tue Jul 10 08:04:54 2012] fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Jul 10 08:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Tue Jul 10 08:04:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555170501_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 08:05:05 2012] Warning, spatial fit 37 centroid is now closest to src. 26
[Tue Jul 10 08:05:05 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 08:05:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 08:05:05 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 08:05:05 2012] Source does appear to be extended
[Tue Jul 10 08:05:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 09:41:02 2012] XMMSAS src. selection expression = ellipse(9314.202000, 27447.754000, 1574.754045, 1574.754045, 0.000000, X, Y)
[Tue Jul 10 09:41:02 2012] Writing source region out to fullrun_mos2_xmm0555170501_pi300-10000_pass1_cl_src29_src.reg
[Tue Jul 10 09:41:02 2012] Extracting stamp from image fullrun_mos2_xmm0555170501_pi300-10000_cl_sm2.00.img.gz, (17, 226) - (198, 407)
[Tue Jul 10 09:41:02 2012] XMMSAS bgd. selection expression = annulus(9314.202000, 27447.754000, 2624.590076, 5249.180151, X, Y) && !ellipse(13735.857208, 30742.392487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13396.439590, 27942.178223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14612.597200, 31464.349600, 481.786414, 481.786414, 0.000000, X, Y) && !ellipse(13684.329727, 24636.788879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8309.222916, 29076.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10434.969467, 26299.957642, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 09:41:02 2012] Writing fullrun_mos2_xmm0555170501_pi300-10000_pass1_cl_src29.gif
[Tue Jul 10 09:50:27 2012] Mean detx,y = (-15423.53, -674.12) 
[Tue Jul 10 09:50:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 09:50:48 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 09:50:49 2012] Setting source spectrum file to fullrun_mos2_xmm0555170501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jul 10 09:50:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555170501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jul 10 10:13:14 2012] Updating aperture counts using extracted products
[Tue Jul 10 10:13:14 2012] Error reading totcts from fullrun_mos2_xmm0555170501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jul 10 10:13:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 10:13:15 2012] Using photon index=1.80, rate=0.00241, arf fullrun_mos2_xmm0555170501_pi300-10000_pass1_cl_src29.arf
[Tue Jul 10 10:13:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 10:13:15 2012] Updating source flux to 4.7e-14