[Tue Mar 20 20:19:53 2012] Detection parameters:
  Position = (278.9, 276.0) = 5 59 48.32 -50 27 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1517.0 +/- 83.3
  Background counts = 227.9
  Rate = 0.02 +/- 0.0009

[Tue Mar 20 20:19:54 2012] Off-axis axis estimate = 2.16'
[Tue Mar 20 21:36:00 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 21:36:00 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Tue Mar 20 21:36:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.656
[Tue Mar 20 21:36:00 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.51"
[Tue Mar 20 23:09:42 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 20 23:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_src2.csv
[Tue Mar 20 23:09:42 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 20 23:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_src2.csv
[Tue Mar 20 23:09:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 23:09:42 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 20 23:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 20 23:09:42 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 20 23:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 20 23:09:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555170201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 00:12:05 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Wed Mar 21 00:12:05 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 00:12:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 00:12:05 2012] Assessing source extent using major
[Wed Mar 21 00:12:05 2012] Source does appear to be extended
[Wed Mar 21 00:12:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 00:12:05 2012] Source is confused with source 3
[Wed Mar 21 08:40:29 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 08:40:29 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Mar 21 08:40:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.656
[Wed Mar 21 08:40:29 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.51"
[Wed Mar 21 09:59:44 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar 21 09:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_src2.csv
[Wed Mar 21 09:59:44 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar 21 09:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_src2.csv
[Wed Mar 21 09:59:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 09:59:44 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar 21 09:59:44 2012] fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar 21 09:59:44 2012] Fit fullrun_mos1_xmm0555170201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Mar 21 11:09:24 2012] Source 1 is offset by -2.034840 and -6.363473 pixels which is larger than
2 X fitted extent = 2.353448 x 2.353448, not incorporating fit results
[Wed Mar 21 11:09:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 11:09:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 11:09:24 2012] Assessing source extent using major
[Wed Mar 21 11:09:24 2012] Source does appear to be extended
[Wed Mar 21 11:09:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 20:22:04 2012] Counts = 1516.993286, rescaling region sizes by 2.000000
[Wed Mar 21 20:22:04 2012] XMMSAS src. selection expression = ellipse(24216.139313, 23964.755829, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Mar 21 20:22:04 2012] Writing source region out to fullrun_mos1_xmm0555170201_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 21 20:22:04 2012] Extracting stamp from image fullrun_mos1_xmm0555170201_pi300-10000_cl_sm2.00.img.gz, (204, 201) - (354, 351)
[Wed Mar 21 20:22:04 2012] XMMSAS bgd. selection expression = annulus(24216.139313, 23964.755829, 4350.000000, 8700.000000, X, Y) && !ellipse(24395.064060, 24523.793400, 1454.577642, 1454.577642, 0.000000, X, Y) && !ellipse(23726.031525, 25313.630188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30407.532227, 16972.214462, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 20:22:04 2012] Writing fullrun_mos1_xmm0555170201_pi300-10000_pass1_cl_src1.gif
[Wed Mar 21 20:28:15 2012] Mean detx,y = (325.11, -213.15) 
[Wed Mar 21 20:28:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 20:32:25 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 20:32:26 2012] Setting source spectrum file to fullrun_mos1_xmm0555170201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 20:32:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555170201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 21 21:07:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 21:07:27 2012] rmf not generated due to insufficient counts
[Wed Mar 21 23:29:11 2012] Updating aperture counts using extracted products
[Wed Mar 21 23:29:11 2012] Error reading totcts from fullrun_mos1_xmm0555170201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 21 23:29:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 23:29:12 2012] Using photon index=1.80, rate=0.0162, arf fullrun_mos1_xmm0555170201_pi300-10000_pass1_cl_src1.arf
[Wed Mar 21 23:29:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 23:29:12 2012] Updating source flux to 1.6e-13
[Wed Mar 21 23:29:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting