[Sun May 12 01:14:22 2013] Detection parameters:
  Position = (136.9, 312.6) = 12 2 27.92 30 5 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.1 +/- 21.9
  Background counts = 59.9
  Rate = 0.01 +/- 0.0009

[Sun May 12 01:14:24 2013] Off-axis axis estimate = 11.75'
[Sun May 12 01:17:16 2013] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:17:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 01:17:16 2013] Initial guess for spatial extent in simple fitting = 12.31"
[Sun May 12 01:17:16 2013] source mask rpix=2.8, npix_max = 44, mask sum = 32, frac = 0.722
[Sun May 12 01:17:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.31"
[Sun May 12 01:52:53 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 12 01:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_src1.csv
[Sun May 12 01:52:53 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 12 01:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_src1.csv
[Sun May 12 01:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:52:53 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 12 01:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 01:52:53 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 12 01:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 01:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:38:03 2013] Spatial fit model total counts = 496.305000, observed total counts = 414.000000
[Sun May 12 02:38:03 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:38:03 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:38:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:38:03 2013] Assessing source extent using major
[Sun May 12 02:38:03 2013] Source does appear to be extended
[Sun May 12 02:38:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:38:16 2013] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:38:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 02:38:16 2013] Initial guess for spatial extent in simple fitting = 12.31"
[Sun May 12 02:38:16 2013] source mask rpix=2.8, npix_max = 44, mask sum = 32, frac = 0.722
[Sun May 12 02:38:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.31"
[Sun May 12 03:14:50 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 12 03:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_src1.csv
[Sun May 12 03:14:50 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 12 03:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_src1.csv
[Sun May 12 03:14:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 03:14:50 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 12 03:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 12 03:14:50 2013] fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 12 03:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 12 03:14:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 03:57:16 2013] Spatial fit model total counts = 495.595000, observed total counts = 414.000000
[Sun May 12 03:57:16 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 03:57:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 03:57:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 03:57:16 2013] Assessing source extent using major
[Sun May 12 03:57:16 2013] Source does appear to be extended
[Sun May 12 03:57:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 03:57:35 2013] XMMSAS src. selection expression = ellipse(11863.745605, 27150.068817, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 03:57:35 2013] Writing source region out to fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1_src.reg
[Sun May 12 03:57:35 2013] Extracting stamp from image fullrun_pn_xmm0555060501_pi300-10000_cl_sm2.00.img.gz, (99, 275) - (174, 350)
[Sun May 12 03:57:35 2013] XMMSAS bgd. selection expression = annulus(11863.745605, 27150.068817, 1087.500000, 2175.000000, X, Y)
[Sun May 12 03:57:35 2013] Writing fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1.gif
[Sun May 12 03:57:42 2013] Mean detx,y = (11672.85, 7633.15) 
[Sun May 12 03:57:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 03:58:08 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 03:58:08 2013] Setting source spectrum file to fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 12 03:58:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 12 04:16:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 04:16:44 2013] rmf not generated due to insufficient counts
[Sun May 12 04:53:10 2013] Updating aperture counts using extracted products
[Sun May 12 04:53:10 2013] Total counts from fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 245.00
[Sun May 12 04:53:10 2013] Total counts from fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 636.00
[Sun May 12 04:53:10 2013] Got source and background scale factors 1039252.000000, 9294929.000000
[Sun May 12 04:53:10 2013] User source parameters:
  Position = (136.9, 312.6) = 12 2 27.92 30 5 50.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 173.9 +/- 16.7
  Background aperture counts = 71.1
  Rate = 0.01 +/- 0.001

[Sun May 12 04:53:10 2013] Updating counts from extracted products
[Sun May 12 04:53:10 2013] Set source signif. to 173.89/8.43 = 20.62
[Sun May 12 04:53:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:53:16 2013] Using photon index=1.80, rate=0.013, arf fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1.arf
[Sun May 12 04:53:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:53:18 2013] Updating source flux to 8e-14
[Sun May 12 04:53:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:53:30 2013] xmm0555060501/analysis//spectral/fullrun_pn_xmm0555060501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete