[Wed May  8 13:05:27 2013] Detection parameters:
  Position = (307.0, 413.1) = 12 1 32.96 30 13 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 725.0 +/- 34.1
  Background counts = 80.9
  Rate = 0.03 +/- 0.002

[Wed May  8 13:05:28 2013] Off-axis axis estimate = 8.33'
[Wed May  8 13:07:32 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed May  8 13:07:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 13:07:32 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Wed May  8 13:07:32 2013] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.696
[Wed May  8 13:07:32 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.59"
[Wed May  8 13:37:17 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  8 13:37:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_src1.csv
[Wed May  8 13:37:17 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  8 13:37:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_src1.csv
[Wed May  8 13:37:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 13:37:18 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  8 13:37:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May  8 13:37:18 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  8 13:37:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May  8 13:37:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 14:08:30 2013] Spatial fit model total counts = 1842.020000, observed total counts = 1093.000000
[Wed May  8 14:08:30 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 14:08:30 2013] Vigneting correction estimate = 1.000000
[Wed May  8 14:08:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 14:08:30 2013] Assessing source extent using major
[Wed May  8 14:08:30 2013] Source does appear to be extended
[Wed May  8 14:08:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 14:08:30 2013] Source is confused with source 4
[Wed May  8 14:08:40 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed May  8 14:08:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 14:08:40 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Wed May  8 14:08:40 2013] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.696
[Wed May  8 14:08:40 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.59"
[Wed May  8 14:34:45 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_src1.ximg exists
[Wed May  8 14:34:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_src1.csv
[Wed May  8 14:34:45 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May  8 14:34:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_src1.csv
[Wed May  8 14:34:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 14:34:45 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May  8 14:34:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May  8 14:34:45 2013] fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  8 14:34:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May  8 14:34:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 15:03:33 2013] Spatial fit model total counts = 1842.010000, observed total counts = 1093.000000
[Wed May  8 15:03:33 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 15:03:33 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.920715 pixels away
[Wed May  8 15:03:33 2013] Vigneting correction estimate = 1.000000
[Wed May  8 15:03:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 15:03:33 2013] Assessing source extent using major
[Wed May  8 15:03:33 2013] Source does appear to be extended
[Wed May  8 15:03:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 15:03:46 2013] XMMSAS src. selection expression = ellipse(26658.219330, 35887.207367, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 15:03:46 2013] Writing source region out to fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1_src.reg
[Wed May  8 15:03:46 2013] Extracting stamp from image fullrun_pn_xmm0555060401_pi300-10000_cl_sm2.00.img.gz, (269, 376) - (344, 451)
[Wed May  8 15:03:46 2013] XMMSAS bgd. selection expression = annulus(26658.219330, 35887.207367, 1087.500000, 2175.000000, X, Y) && !ellipse(26990.613068, 36079.827087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25664.180200, 33940.463800, 532.322415, 405.115212, 0.069779, X, Y) && !ellipse(28826.108120, 34591.637000, 544.953616, 345.760810, 7.358028, X, Y)
[Wed May  8 15:03:46 2013] Writing fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1.gif
[Wed May  8 15:03:54 2013] Mean detx,y = (-7448.53, 9235.09) 
[Wed May  8 15:03:56 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 15:04:33 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 15:04:33 2013] Setting source spectrum file to fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  8 15:04:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  8 15:16:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  8 15:16:42 2013] rmf not generated due to insufficient counts
[Wed May  8 16:03:59 2013] Updating aperture counts using extracted products
[Wed May  8 16:03:59 2013] Total counts from fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 847.00
[Wed May  8 16:03:59 2013] Total counts from fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1233.00
[Wed May  8 16:03:59 2013] Got source and background scale factors 1088495.000000, 9907906.000000
[Wed May  8 16:03:59 2013] User source parameters:
  Position = (307.0, 413.1) = 12 1 32.96 30 13 14.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 711.5 +/- 30.1
  Background aperture counts = 135.5
  Rate = 0.05 +/- 0.002

[Wed May  8 16:03:59 2013] Updating counts from extracted products
[Wed May  8 16:03:59 2013] Set source signif. to 711.54/11.64 = 61.14
[Wed May  8 16:04:04 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 16:04:04 2013] Using photon index=1.80, rate=0.0513, arf fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1.arf
[Wed May  8 16:04:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 16:04:04 2013] Updating source flux to 3.5e-13
[Wed May  8 16:04:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 16:04:18 2013] xmm0555060401/analysis//spectral/fullrun_pn_xmm0555060401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete