[Wed May  8 13:06:01 2013] Detection parameters:
  Position = (297.5, 274.0) = 12 1 36.15 30 3 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 322.7 +/- 22.6
  Background counts = 29.9
  Rate = 0.01 +/- 0.001

[Wed May  8 13:06:01 2013] Off-axis axis estimate = 1.77'
[Wed May  8 13:53:31 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed May  8 13:53:31 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Wed May  8 13:53:31 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Wed May  8 13:53:31 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.32"
[Wed May  8 14:08:26 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass0_src3.ximg exists
[Wed May  8 14:08:26 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May  8 14:08:26 2013] Fit fullrun_mos2_xmm0555060401_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May  8 14:08:27 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May  8 14:08:27 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May  8 14:08:27 2013] Fit fullrun_mos2_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May  8 14:08:34 2013] Spatial fit model total counts = 386.905000, observed total counts = 367.000000
[Wed May  8 14:08:34 2013] Offset between fit and detection position for source 1 = 0.013777 pixels
[Wed May  8 14:08:34 2013] 387.072000 total counts/ 201.074000 bgd. counts: snr = 13.116873
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013777 pixels
  Position = (297.5, 274.0) = 12 1 36.16 30 3 4.4
  Extent = 4.0 (3.6-4.6)", rotation angle = 0
  Source counts = 186.0 +/- 19.7
  Background counts = 201.1
  Rate = 0.009 +/- 0.0009
[Wed May  8 14:08:34 2013] Vigneting correction estimate = 1.000000
[Wed May  8 14:08:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 14:08:34 2013] Assessing source extent using major axis lower bound
[Wed May  8 14:08:34 2013] Source does appear to be extended
[Wed May  8 14:08:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 14:49:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 14:49:04 2013] Initial guess for spatial extent in simple fitting = 4.02"
[Wed May  8 14:49:04 2013] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.740
[Wed May  8 14:49:04 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 4.02"
[Wed May  8 15:03:28 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_src3.ximg exists
[Wed May  8 15:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_src3.csv
[Wed May  8 15:03:28 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May  8 15:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_src3.csv
[Wed May  8 15:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 15:03:28 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May  8 15:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May  8 15:03:28 2013] fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May  8 15:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May  8 15:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 15:03:38 2013] Warning, spatial fit 3 centroid is now closest to src. 2
[Wed May  8 15:03:38 2013] Vigneting correction estimate = 1.000000
[Wed May  8 15:03:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 15:03:38 2013] Assessing source extent using major axis lower bound
[Wed May  8 15:03:38 2013] Source does appear to be extended
[Wed May  8 15:03:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 15:47:48 2013] XMMSAS src. selection expression = ellipse(25830.850000, 23789.979400, 241.208407, 241.208407, 0.000000, X, Y)
[Wed May  8 15:47:48 2013] Writing source region out to fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1_src.reg
[Wed May  8 15:47:48 2013] Extracting stamp from image fullrun_mos2_xmm0555060401_pi300-10000_cl_sm2.00.img.gz, (284, 260) - (311, 288)
[Wed May  8 15:47:48 2013] XMMSAS bgd. selection expression = annulus(25830.850000, 23789.979400, 402.014012, 804.028023, X, Y)
[Wed May  8 15:47:48 2013] Writing fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1.gif
[Wed May  8 15:48:16 2013] Mean detx,y = (-87.27, 74.08) 
[Wed May  8 15:48:17 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 15:48:24 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 15:48:24 2013] Setting source spectrum file to fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  8 15:48:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  8 16:04:07 2013] Updating aperture counts using extracted products
[Wed May  8 16:04:07 2013] Total counts from fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 202.00
[Wed May  8 16:04:07 2013] Total counts from fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 132.00
[Wed May  8 16:04:07 2013] Got source and background scale factors 182400.000000, 1323792.000000
[Wed May  8 16:04:08 2013] User source parameters:
  Position = (297.5, 274.0) = 12 1 36.16 30 3 4.4
  Extent = 4.0 (3.6-4.6)", rotation angle = 0
  Source aperture counts = 183.8 +/- 15.2
  Background aperture counts = 18.2
  Rate = 0.009 +/- 0.0007

[Wed May  8 16:04:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 16:04:09 2013] Using photon index=1.80, rate=0.00885, arf fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1.arf
[Wed May  8 16:04:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 16:04:09 2013] Updating source flux to 1.3e-13
[Wed May  8 16:04:16 2013] xmm0555060401/analysis//spectral/fullrun_mos2_xmm0555060401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete