[Wed May  8 13:05:44 2013] Detection parameters:
  Position = (311.1, 106.8) = 12 1 31.60 29 50 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.1 +/- 13.5
  Background counts = 25.7
  Rate = 0.004 +/- 0.0006

[Wed May  8 13:05:44 2013] Off-axis axis estimate = 13.92'
[Wed May  8 13:37:18 2013] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Wed May  8 13:37:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 13:37:18 2013] Initial guess for spatial extent in simple fitting = 13.39"
[Wed May  8 13:37:18 2013] source mask rpix=3.1, npix_max = 51, mask sum = 39, frac = 0.762
[Wed May  8 13:37:18 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.39"
[Wed May  8 13:53:31 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass0_src10.ximg exists
[Wed May  8 13:53:31 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May  8 13:53:31 2013] Fit fullrun_mos1_xmm0555060401_pi300-10000_cl_pass0_src10 appears to have run properly
[Wed May  8 13:53:31 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May  8 13:53:31 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May  8 13:53:31 2013] Fit fullrun_mos1_xmm0555060401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed May  8 14:08:32 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 18.287221 pixels away
[Wed May  8 14:08:32 2013] Vigneting correction estimate = 1.000000
[Wed May  8 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 14:08:32 2013] Assessing source extent using major
[Wed May  8 14:08:32 2013] Source does appear to be extended
[Wed May  8 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 14:34:46 2013] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Wed May  8 14:34:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 14:34:46 2013] Initial guess for spatial extent in simple fitting = 13.39"
[Wed May  8 14:34:46 2013] source mask rpix=3.1, npix_max = 51, mask sum = 39, frac = 0.762
[Wed May  8 14:34:46 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 13.39"
[Wed May  8 14:49:04 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_src10.ximg exists
[Wed May  8 14:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_src10.csv
[Wed May  8 14:49:04 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May  8 14:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_src10.csv
[Wed May  8 14:49:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 14:49:04 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May  8 14:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May  8 14:49:04 2013] fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  8 14:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May  8 14:49:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555060401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 15:03:35 2013] Spatial fit model total counts = 279.882000, observed total counts = 219.000000
[Wed May  8 15:03:35 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 15:03:35 2013] Vigneting correction estimate = 1.000000
[Wed May  8 15:03:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 15:03:35 2013] Assessing source extent using major
[Wed May  8 15:03:35 2013] Source does appear to be extended
[Wed May  8 15:03:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 15:31:39 2013] XMMSAS src. selection expression = ellipse(27015.888947, 9244.085945, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 15:31:39 2013] Writing source region out to fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15_src.reg
[Wed May  8 15:31:39 2013] Extracting stamp from image fullrun_mos1_xmm0555060401_pi300-10000_cl_sm2.00.img.gz, (274, 69) - (349, 144)
[Wed May  8 15:31:39 2013] XMMSAS bgd. selection expression = annulus(27015.888947, 9244.085945, 1087.500000, 2175.000000, X, Y)
[Wed May  8 15:31:39 2013] Writing fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15.gif
[Wed May  8 15:32:55 2013] Mean detx,y = (12825.22, 7302.94) 
[Wed May  8 15:32:56 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 15:33:09 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 15:33:09 2013] Setting source spectrum file to fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May  8 15:33:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May  8 15:47:28 2013] Not generating rmf since there are only 95 counts
[Wed May  8 15:47:28 2013] rmf not generated due to insufficient counts
[Wed May  8 16:04:06 2013] Updating aperture counts using extracted products
[Wed May  8 16:04:06 2013] Total counts from fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 138.00
[Wed May  8 16:04:06 2013] Total counts from fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15_bgd.pi.gz = 493.00
[Wed May  8 16:04:06 2013] Got source and background scale factors 1000534.000000, 6715251.000000
[Wed May  8 16:04:06 2013] User source parameters:
  Position = (311.1, 106.8) = 12 1 31.60 29 50 56.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 64.5 +/- 12.8
  Background aperture counts = 73.5
  Rate = 0.003 +/- 0.0006

[Wed May  8 16:04:06 2013] Updating counts from extracted products
[Wed May  8 16:04:06 2013] Set source signif. to 64.55/8.57 = 7.53
[Wed May  8 16:04:07 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 16:04:07 2013] Using photon index=1.80, rate=0.00323, arf fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15.arf
[Wed May  8 16:04:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 16:04:07 2013] Updating source flux to 8.2e-14
[Wed May  8 16:04:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 16:04:14 2013] xmm0555060401/analysis//spectral/fullrun_mos1_xmm0555060401_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete