[Sun Mar 18 10:26:05 2012] Detection parameters:
  Position = (303.6, 321.9) = 11 59 41.18 -19 59 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44291.8 +/- 249.0
  Background counts = 59.7
  Rate = 2 +/- 0.01

[Sun Mar 18 10:26:13 2012] Off-axis axis estimate = 1.74'
[Sun Mar 18 10:30:44 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 10:30:44 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 10:30:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Sun Mar 18 10:30:44 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.30"
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src5.csv
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src5.csv
[Sun Mar 18 12:46:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Mar 18 12:46:53 2012] Fit fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Mar 18 14:31:17 2012] Spatial fit model total counts = 39471.900000, observed total counts = 39044.000000
[Sun Mar 18 14:31:17 2012] Offset between fit and detection position for source 6 = 0.169876 pixels
[Sun Mar 18 14:31:17 2012] 39691.550000 total counts/ 8398.350000 bgd. counts: snr = 341.470343
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.169876 pixels
  Position = (303.4, 321.8) = 11 59 41.23 -19 59 24.8
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 31293.2 +/- 199.2
  Background counts = 8398.4
  Rate = 1 +/- 0.008
[Sun Mar 18 14:31:17 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:17 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 14:31:17 2012] Source does appear to be extended
[Sun Mar 18 14:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 14:31:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 14:31:43 2012] Initial guess for spatial extent in simple fitting = 5.79"
[Sun Mar 18 14:31:43 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.896
[Sun Mar 18 14:31:43 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.79"
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src5.csv
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src5.csv
[Sun Mar 18 16:34:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Mar 18 16:34:41 2012] Fit fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Mar 18 17:49:10 2012] Spatial fit model total counts = 39496.200000, observed total counts = 39044.000000
[Sun Mar 18 17:49:10 2012] Offset between fit and detection position for source 6 = 0.000032 pixels
[Sun Mar 18 17:49:10 2012] 39716.470000 total counts/ 8407.870000 bgd. counts: snr = 341.444919
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000032 pixels
  Position = (303.4, 321.8) = 11 59 41.23 -19 59 24.8
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 31308.6 +/- 199.3
  Background counts = 8407.9
  Rate = 1 +/- 0.008
[Sun Mar 18 17:49:11 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:11 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 17:49:11 2012] Source does appear to be extended
[Sun Mar 18 17:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 17:49:38 2012] Counts = 31308.600000, rescaling region sizes by 3.000000
[Sun Mar 18 17:49:38 2012] XMMSAS src. selection expression = ellipse(26350.986000, 27944.792400, 1041.064230, 1041.064230, 0.000000, X, Y)
[Sun Mar 18 17:49:38 2012] Writing source region out to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src6_src.reg
[Sun Mar 18 17:49:38 2012] Extracting stamp from image fullrun_pn_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (244, 262) - (363, 382)
[Sun Mar 18 17:49:39 2012] XMMSAS bgd. selection expression = annulus(26350.986000, 27944.792400, 5205.321150, 10410.642300, X, Y) && !ellipse(24150.459198, 23518.456024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17172.942642, 23796.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26664.529018, 18803.127801, 1109.369325, 747.158436, 353.046026, X, Y) && !ellipse(30388.246094, 39163.948944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30046.400000, 38974.428000, 1470.864042, 1470.864042, 0.000000, X, Y) && !ellipse(35133.423309, 37293.329468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31102.581726, 35818.367767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23731.158386, 34698.853424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34251.887207, 32307.534912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21995.350677, 30496.701385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.863007, 29880.832825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.647552, 28568.345642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24948.407013, 28833.795471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33720.804352, 27876.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36245.206207, 27074.403137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33666.004547, 25925.226807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26943.536743, 26411.808716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.093360, 25230.113000, 570.597616, 570.597616, 0.000000, X, Y) && !ellipse(27511.933000, 24661.366000, 1203.288035, 1203.288035, 0.000000, X, Y) && !ellipse(27650.686600, 24263.396000, 2400.240069, 510.816815, 69.020000, X, Y) && !ellipse(27867.547800, 23566.192000, 1259.400036, 1259.400036, 0.000000, X, Y) && !ellipse(28313.498000, 22407.054000, 1293.768037, 508.164815, 72.939000, X, Y) && !ellipse(28412.904800, 21972.360000, 1849.536053, 731.349621, 90.000000, X, Y) && !ellipse(28546.748600, 21732.738000, 1495.744043, 560.832016, 90.000000, X, Y) && !ellipse(29184.313400, 20259.693800, 1672.360048, 1015.384029, 90.000000, X, Y) && !ellipse(33528.847060, 20098.093200, 1449.436399, 1340.912039, 5.075300, X, Y) && !ellipse(29137.412400, 20444.142000, 1453.928042, 898.480026, 90.000000, X, Y) && !ellipse(25934.803497, 19535.237701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29455.609140, 19216.538000, 1541.520044, 321.323209, 70.053000, X, Y) && !ellipse(25652.414581, 18877.269669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18036.327637, 18530.780380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29901.749200, 18034.635400, 1610.880046, 467.130413, 70.823000, X, Y) && !ellipse(30149.067780, 17184.056595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.338900, 17004.564800, 691.246420, 691.246420, 0.000000, X, Y) && !ellipse(30484.040600, 16315.450000, 1721.288050, 615.158418, 69.154000, X, Y)
[Sun Mar 18 17:49:39 2012] Writing fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src6.gif
[Sun Mar 18 17:56:53 2012] Mean detx,y = (33.88, -279.76) 
[Sun Mar 18 17:57:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 18:01:54 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 18:01:54 2012] Setting source spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Mar 18 18:01:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Mar 18 21:23:41 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:41 2012] Error reading totcts from fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Mar 18 21:23:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:43 2012] Using photon index=1.80, rate=1.3, arf fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src6.arf
[Sun Mar 18 21:23:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:43 2012] Updating source flux to 2.9e-12