[Sun Mar 18 10:26:05 2012] Detection parameters:
  Position = (304.6, 216.0) = 11 59 40.86 -20 7 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.2 +/- 22.5
  Background counts = 56.6
  Rate = 0.02 +/- 0.002

[Sun Mar 18 10:26:13 2012] Off-axis axis estimate = 5.99'
[Sun Mar 18 10:30:44 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 10:30:44 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Sun Mar 18 10:30:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.055
[Sun Mar 18 10:30:44 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.43"
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Mar 18 12:46:53 2012] Fit fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar 18 12:46:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:31:17 2012] Spatial fit model total counts = 765.189000, observed total counts = 772.000000
[Sun Mar 18 14:31:17 2012] Offset between fit and detection position for source 5 = 2.536196 pixels
[Sun Mar 18 14:31:17 2012] 695.904000 total counts/ 272.944000 bgd. counts: snr = 25.601330
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.536196 pixels
  Position = (307.0, 216.7) = 11 59 40.11 -20 7 1.9
  Extent = 13.9" x 9.3", rotation angle = 353
  Source counts = 423.0 +/- 26.4
  Background counts = 272.9
  Rate = 0.02 +/- 0.001
[Sun Mar 18 14:31:17 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:17 2012] Assessing source extent using major
[Sun Mar 18 14:31:17 2012] Source does appear to be extended
[Sun Mar 18 14:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.48
[Sun Mar 18 14:31:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 14:31:43 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Sun Mar 18 14:31:43 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.897
[Sun Mar 18 14:31:43 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.60"
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src4.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src4.csv
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src4.csv
[Sun Mar 18 16:34:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Mar 18 16:34:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Mar 18 16:34:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Mar 18 16:34:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 17:49:10 2012] Source 5 is offset by 2.323577 and 0.766644 pixels which is larger than
2 X fitted extent = 2.121333 x 2.121333, not incorporating fit results
[Sun Mar 18 17:49:11 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:11 2012] Assessing source extent using major
[Sun Mar 18 17:49:11 2012] Source does appear to be extended
[Sun Mar 18 17:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.48
[Sun Mar 18 17:49:38 2012] XMMSAS src. selection expression = ellipse(26664.529018, 18803.127801, 832.026994, 560.368827, 353.046026, X, Y)
[Sun Mar 18 17:49:38 2012] Writing source region out to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src5_src.reg
[Sun Mar 18 17:49:38 2012] Extracting stamp from image fullrun_pn_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (259, 169) - (355, 265)
[Sun Mar 18 17:49:38 2012] XMMSAS bgd. selection expression = annulus(26664.529018, 18803.127801, 1386.711656, 2773.423313, X, Y) && !ellipse(28313.498000, 22407.054000, 1293.768037, 508.164815, 72.939000, X, Y) && !ellipse(28412.904800, 21972.360000, 1849.536053, 731.349621, 90.000000, X, Y) && !ellipse(28546.748600, 21732.738000, 1495.744043, 560.832016, 90.000000, X, Y) && !ellipse(29184.313400, 20259.693800, 1672.360048, 1015.384029, 90.000000, X, Y) && !ellipse(29137.412400, 20444.142000, 1453.928042, 898.480026, 90.000000, X, Y) && !ellipse(25934.803497, 19535.237701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29455.609140, 19216.538000, 1541.520044, 321.323209, 70.053000, X, Y) && !ellipse(25652.414581, 18877.269669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29901.749200, 18034.635400, 1610.880046, 467.130413, 70.823000, X, Y) && !ellipse(30149.067780, 17184.056595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.338900, 17004.564800, 691.246420, 691.246420, 0.000000, X, Y) && !ellipse(30484.040600, 16315.450000, 1721.288050, 615.158418, 69.154000, X, Y)
[Sun Mar 18 17:49:38 2012] Writing fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src5.gif
[Sun Mar 18 17:54:28 2012] Mean detx,y = (-2926.98, 8387.01) 
[Sun Mar 18 17:54:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 17:56:00 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 17:56:00 2012] Setting source spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 18 17:56:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Mar 18 21:23:41 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:41 2012] Error reading totcts from fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 18 21:23:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:43 2012] Using photon index=1.80, rate=0.0176, arf fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src5.arf
[Sun Mar 18 21:23:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:43 2012] Updating source flux to 7.3e-14
[Sun Mar 18 21:24:21 2012] Flag b found in src. 5 procflags, skipping spectral fitting