[Sun Mar 18 10:26:12 2012] Detection parameters:
  Position = (310.3, 304.1) = 11 59 39.12 -20 0 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.3 +/- 19.3
  Background counts = 59.2
  Rate = 0.005 +/- 0.0009

[Sun Mar 18 10:26:13 2012] Off-axis axis estimate = 0.95'
[Sun Mar 18 10:30:44 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 10:30:44 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun Mar 18 10:30:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Sun Mar 18 10:30:44 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 6.90"
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src26.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src26.csv
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src26.csv
[Sun Mar 18 12:46:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 12:46:54 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Mar 18 12:46:54 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Mar 18 12:46:54 2012] Fit fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Mar 18 14:31:17 2012] Source 28 is offset by 3.205112 and -6.765716 pixels which is larger than
2 X fitted extent = 6.348736 x 6.348736, not incorporating fit results
[Sun Mar 18 14:31:17 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:17 2012] Assessing source extent using major
[Sun Mar 18 14:31:17 2012] Source does appear to be extended
[Sun Mar 18 14:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 14:31:43 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 14:31:43 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun Mar 18 14:31:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Sun Mar 18 14:31:43 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 6.90"
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src23.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src23.csv
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src23.csv
[Sun Mar 18 16:34:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Mar 18 16:34:41 2012] Fit fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Mar 18 17:49:11 2012] Source 28 is offset by 3.226100 and -6.757877 pixels which is larger than
2 X fitted extent = 6.348736 x 6.348736, not incorporating fit results
[Sun Mar 18 17:49:11 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:11 2012] Assessing source extent using major
[Sun Mar 18 17:49:11 2012] Source does appear to be extended
[Sun Mar 18 17:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 17:49:39 2012] XMMSAS src. selection expression = ellipse(26943.536743, 26411.808716, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 17:49:39 2012] Writing source region out to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src28_src.reg
[Sun Mar 18 17:49:39 2012] Extracting stamp from image fullrun_pn_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (273, 267) - (348, 342)
[Sun Mar 18 17:49:39 2012] XMMSAS bgd. selection expression = annulus(26943.536743, 26411.808716, 1087.500000, 2175.000000, X, Y) && !ellipse(24150.459198, 23518.456024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.986000, 27944.792400, 1388.085640, 1388.085640, 0.000000, X, Y) && !ellipse(27526.647552, 28568.345642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24948.407013, 28833.795471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.093360, 25230.113000, 570.597616, 570.597616, 0.000000, X, Y) && !ellipse(27511.933000, 24661.366000, 1203.288035, 1203.288035, 0.000000, X, Y) && !ellipse(27650.686600, 24263.396000, 2400.240069, 510.816815, 69.020000, X, Y) && !ellipse(27867.547800, 23566.192000, 1259.400036, 1259.400036, 0.000000, X, Y)
[Sun Mar 18 17:49:39 2012] Writing fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src28.gif
[Sun Mar 18 18:25:18 2012] Mean detx,y = (55.64, 1293.17) 
[Sun Mar 18 18:25:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 18:25:56 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 18:25:57 2012] Setting source spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Mar 18 18:25:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Mar 18 19:46:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 18 19:46:51 2012] rmf not generated due to insufficient counts
[Sun Mar 18 21:23:41 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:41 2012] Error reading totcts from fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Mar 18 21:23:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:44 2012] Using photon index=1.80, rate=0.00537, arf fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src28.arf
[Sun Mar 18 21:23:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:45 2012] Updating source flux to 1.3e-14
[Sun Mar 18 21:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting