[Sun Mar 18 10:26:11 2012] Detection parameters:
  Position = (359.4, 164.7) = 11 59 23.93 -20 10 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.9 +/- 13.5
  Background counts = 45.0
  Rate = 0.003 +/- 0.0006

[Sun Mar 18 10:26:13 2012] Off-axis axis estimate = 10.65'
[Sun Mar 18 10:30:44 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 10:30:44 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Sun Mar 18 10:30:44 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.878
[Sun Mar 18 10:30:44 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.76"
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src23.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src23.csv
[Sun Mar 18 12:46:53 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Mar 18 12:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src23.csv
[Sun Mar 18 12:46:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 12:46:54 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Mar 18 12:46:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Mar 18 12:46:54 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Mar 18 12:46:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Mar 18 12:46:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:31:17 2012] Warning, spatial fit 23 centroid is now closest to src. 37
[Sun Mar 18 14:31:17 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:17 2012] Assessing source extent using major
[Sun Mar 18 14:31:17 2012] Source does appear to be extended
[Sun Mar 18 14:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 14:31:43 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 14:31:43 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Sun Mar 18 14:31:43 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.878
[Sun Mar 18 14:31:43 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 11.76"
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src21.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src21.csv
[Sun Mar 18 16:34:40 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Mar 18 16:34:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src21.csv
[Sun Mar 18 16:34:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Mar 18 16:34:41 2012] fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Mar 18 16:34:41 2012] Fit fullrun_pn_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Mar 18 17:49:11 2012] Warning, spatial fit 21 centroid is now closest to src. 37
[Sun Mar 18 17:49:11 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:11 2012] Assessing source extent using major
[Sun Mar 18 17:49:11 2012] Source does appear to be extended
[Sun Mar 18 17:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 17:49:39 2012] XMMSAS src. selection expression = ellipse(31221.604034, 14282.870239, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 17:49:39 2012] Writing source region out to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src25_src.reg
[Sun Mar 18 17:49:39 2012] Extracting stamp from image fullrun_pn_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (322, 127) - (397, 202)
[Sun Mar 18 17:49:39 2012] XMMSAS bgd. selection expression = annulus(31221.604034, 14282.870239, 1087.500000, 2175.000000, X, Y) && !ellipse(30851.734558, 15094.352066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29901.749200, 18034.635400, 1610.880046, 467.130413, 70.823000, X, Y) && !ellipse(30149.067780, 17184.056595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.040600, 16315.450000, 1721.288050, 615.158418, 69.154000, X, Y) && !ellipse(30654.237549, 15872.115021, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 17:49:39 2012] Writing fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src25.gif
[Sun Mar 18 18:23:15 2012] Mean detx,y = (61.15, 14028.07) 
[Sun Mar 18 18:23:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 18:23:59 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 18:23:59 2012] Setting source spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Mar 18 18:23:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Mar 18 19:46:26 2012] Not generating rmf since there are only 66 counts
[Sun Mar 18 19:46:26 2012] rmf not generated due to insufficient counts
[Sun Mar 18 21:23:41 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:41 2012] Error reading totcts from fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Mar 18 21:23:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:44 2012] Using photon index=1.80, rate=0.00272, arf fullrun_pn_xmm0555020201_pi300-10000_pass1_cl_src25.arf
[Sun Mar 18 21:23:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:44 2012] Updating source flux to 1.9e-14
[Sun Mar 18 21:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting