[Sun Mar 18 10:27:26 2012] Detection parameters:
  Position = (287.2, 332.1) = 11 59 46.25 -19 58 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.3 +/- 12.4
  Background counts = 13.3
  Rate = 0.003 +/- 0.0005

[Sun Mar 18 10:27:26 2012] Off-axis axis estimate = 2.58'
[Sun Mar 18 13:28:21 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 13:28:21 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Mar 18 13:28:21 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun Mar 18 13:28:21 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.72"
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src15.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src15.csv
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src15.csv
[Sun Mar 18 14:31:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Mar 18 14:31:01 2012] Fit fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Mar 18 14:31:29 2012] Source 16 is offset by 5.183487 and -5.202607 pixels which is larger than
2 X fitted extent = 0.887016 x 0.887016, not incorporating fit results
[Sun Mar 18 14:31:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:29 2012] Assessing source extent using major
[Sun Mar 18 14:31:29 2012] Source does appear to be extended
[Sun Mar 18 14:31:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 16:54:48 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 16:54:48 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Mar 18 16:54:48 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun Mar 18 16:54:48 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.72"
[Sun Mar 18 17:48:54 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src14.ximg exists
[Sun Mar 18 17:48:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src14.csv
[Sun Mar 18 17:48:54 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Mar 18 17:48:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src14.csv
[Sun Mar 18 17:48:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 17:48:55 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Mar 18 17:48:55 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Mar 18 17:48:55 2012] Fit fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Mar 18 17:49:21 2012] Source 16 is offset by 5.184683 and -5.204377 pixels which is larger than
2 X fitted extent = 0.887016 x 0.887016, not incorporating fit results
[Sun Mar 18 17:49:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:21 2012] Assessing source extent using major
[Sun Mar 18 17:49:21 2012] Source does appear to be extended
[Sun Mar 18 17:49:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:52:43 2012] XMMSAS src. selection expression = ellipse(24933.873383, 28847.859161, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 20:52:43 2012] Writing source region out to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src16_src.reg
[Sun Mar 18 20:52:43 2012] Extracting stamp from image fullrun_mos2_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (250, 295) - (325, 370)
[Sun Mar 18 20:52:43 2012] XMMSAS bgd. selection expression = annulus(24933.873383, 28847.859161, 1087.500000, 2175.000000, X, Y) && !ellipse(26348.438477, 27949.487518, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27400.005310, 27632.410645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23688.514720, 31327.291200, 320.015295, 320.015295, 0.000000, X, Y)
[Sun Mar 18 20:52:43 2012] Writing fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src16.gif
[Sun Mar 18 21:09:58 2012] Mean detx,y = (1163.53, 1403.90) 
[Sun Mar 18 21:10:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 21:10:14 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 21:10:14 2012] Setting source spectrum file to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Mar 18 21:10:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Mar 18 21:21:31 2012] Not generating rmf since there are only 74 counts
[Sun Mar 18 21:21:31 2012] rmf not generated due to insufficient counts
[Sun Mar 18 21:23:48 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:48 2012] Error reading totcts from fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Mar 18 21:23:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:49 2012] Using photon index=1.80, rate=0.0032, arf fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src16.arf
[Sun Mar 18 21:23:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:49 2012] Updating source flux to 3.1e-14
[Sun Mar 18 21:24:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting