[Sun Mar 18 10:27:26 2012] Detection parameters:
  Position = (277.4, 419.5) = 11 59 49.24 -19 52 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.4 +/- 8.5
  Background counts = 13.5
  Rate = 0.002 +/- 0.0006

[Sun Mar 18 10:27:26 2012] Off-axis axis estimate = 8.91'
[Sun Mar 18 13:28:21 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 13:28:21 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Sun Mar 18 13:28:21 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Sun Mar 18 13:28:21 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.88"
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src17.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src17.csv
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src17.csv
[Sun Mar 18 14:31:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Mar 18 14:31:01 2012] Fit fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Mar 18 14:31:29 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.035657 pixels away
[Sun Mar 18 14:31:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:29 2012] Assessing source extent using major
[Sun Mar 18 14:31:29 2012] Source does appear to be extended
[Sun Mar 18 14:31:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 16:54:48 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 16:54:48 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Sun Mar 18 16:54:48 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Sun Mar 18 16:54:48 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.88"
[Sun Mar 18 17:48:54 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src16.ximg exists
[Sun Mar 18 17:48:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src16.csv
[Sun Mar 18 17:48:54 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Mar 18 17:48:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src16.csv
[Sun Mar 18 17:48:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 17:48:55 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Mar 18 17:48:55 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Mar 18 17:48:55 2012] Fit fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Mar 18 17:49:21 2012] Source 11 is offset by 6.724414 and -7.370918 pixels which is larger than
2 X fitted extent = 1.514681 x 1.514681, not incorporating fit results
[Sun Mar 18 17:49:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:21 2012] Assessing source extent using major
[Sun Mar 18 17:49:21 2012] Source does appear to be extended
[Sun Mar 18 17:49:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:52:43 2012] XMMSAS src. selection expression = ellipse(24089.436005, 36450.254120, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 20:52:43 2012] Writing source region out to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src11_src.reg
[Sun Mar 18 20:52:43 2012] Extracting stamp from image fullrun_mos2_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (240, 382) - (315, 457)
[Sun Mar 18 20:52:43 2012] XMMSAS bgd. selection expression = annulus(24089.436005, 36450.254120, 1087.500000, 2175.000000, X, Y)
[Sun Mar 18 20:52:43 2012] Writing fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src11.gif
[Sun Mar 18 21:10:42 2012] Mean detx,y = (-574.14, 8878.91) 
[Sun Mar 18 21:10:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 21:11:05 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 21:11:05 2012] Setting source spectrum file to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Mar 18 21:11:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Mar 18 21:21:46 2012] Not generating rmf since there are only 29 counts
[Sun Mar 18 21:21:46 2012] rmf not generated due to insufficient counts
[Sun Mar 18 21:23:48 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:48 2012] Error reading totcts from fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Mar 18 21:23:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:49 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src11.arf
[Sun Mar 18 21:23:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:49 2012] Updating source flux to 3.8e-14
[Sun Mar 18 21:24:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting