[Sun Mar 18 10:27:25 2012] Detection parameters:
  Position = (303.4, 321.8) = 11 59 41.23 -19 59 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14075.0 +/- 139.8
  Background counts = 13.5
  Rate = 0.6 +/- 0.006

[Sun Mar 18 10:27:26 2012] Off-axis axis estimate = 1.73'
[Sun Mar 18 13:28:21 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 13:28:21 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 13:28:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sun Mar 18 13:28:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 14:31:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 14:31:01 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 14:31:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:31:29 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.095198 pixels away
[Sun Mar 18 14:31:29 2012] Spatial fit model total counts = 1288.770000, observed total counts = 1063.000000
[Sun Mar 18 14:31:29 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 14:31:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:29 2012] Assessing source extent using major
[Sun Mar 18 14:31:29 2012] Source does appear to be extended
[Sun Mar 18 14:31:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 16:54:48 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 16:54:48 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 16:54:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sun Mar 18 16:54:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Sun Mar 18 17:48:54 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 17:48:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 17:48:54 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 17:48:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 17:48:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 17:48:55 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 17:48:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 18 17:48:55 2012] fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 17:48:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 18 17:48:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 17:49:21 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.587631 pixels away
[Sun Mar 18 17:49:21 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:21 2012] Assessing source extent using major
[Sun Mar 18 17:49:21 2012] Source does appear to be extended
[Sun Mar 18 17:49:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:52:42 2012] Counts = 14075.038086, rescaling region sizes by 3.000000
[Sun Mar 18 20:52:42 2012] XMMSAS src. selection expression = ellipse(26348.438477, 27949.487518, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Mar 18 20:52:42 2012] Writing source region out to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 20:52:42 2012] Extracting stamp from image fullrun_mos2_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (191, 209) - (416, 434)
[Sun Mar 18 20:52:42 2012] XMMSAS bgd. selection expression = annulus(26348.438477, 27949.487518, 9787.500000, 19575.000000, X, Y) && !ellipse(24149.641449, 23497.900787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17175.340000, 23961.428000, 1079.896031, 1079.896031, 0.000000, X, Y) && !ellipse(37610.363861, 16217.413528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40389.558258, 32515.729034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.210000, 19539.676000, 351.152010, 351.152010, 0.000000, X, Y) && !ellipse(26438.895325, 18786.731842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38625.009857, 36300.242310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19275.787620, 24853.808200, 378.265611, 378.265611, 0.000000, X, Y) && !ellipse(33717.964420, 27924.169400, 308.917609, 308.917609, 0.000000, X, Y) && !ellipse(17555.756714, 24460.696716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31102.860504, 35846.128754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33432.886801, 19946.486776, 612.611144, 462.448943, 250.908249, X, Y) && !ellipse(24933.873383, 28847.859161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24830.911580, 17672.830200, 306.120009, 306.120009, 0.000000, X, Y) && !ellipse(24089.436005, 36450.254120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18498.814000, 22753.234000, 1582.480046, 1582.480046, 0.000000, X, Y) && !ellipse(37825.885000, 33399.606400, 504.116015, 504.116015, 0.000000, X, Y) && !ellipse(27400.005310, 27632.410645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23688.514720, 31327.291200, 320.015295, 320.015295, 0.000000, X, Y) && !ellipse(35140.160800, 37278.788800, 353.190410, 353.190410, 0.000000, X, Y) && !ellipse(26208.751200, 12792.189800, 429.532012, 429.532012, 0.000000, X, Y) && !ellipse(26823.362300, 25195.418000, 746.100021, 746.100021, 0.000000, X, Y) && !ellipse(39977.471161, 25726.455383, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 20:52:42 2012] Writing fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 20:52:52 2012] Mean detx,y = (142.84, 136.61) 
[Sun Mar 18 20:52:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 21:04:17 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 21:04:17 2012] Setting source spectrum file to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 21:04:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 21:15:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 18 21:15:01 2012] rmf not generated due to insufficient counts
[Sun Mar 18 21:23:47 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:47 2012] Error reading totcts from fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 21:23:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:48 2012] Using photon index=1.80, rate=0.58, arf fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 21:23:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:48 2012] Updating source flux to 5.2e-12
[Sun Mar 18 21:24:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 18 21:24:21 2012] xmm0555020201/analysis//spectral/fullrun_mos2_xmm0555020201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete