[Sun Mar 18 10:26:39 2012] Detection parameters:
  Position = (465.0, 374.1) = 11 58 51.39 -19 55 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.8 +/- 16.0
  Background counts = 10.3
  Rate = 0.006 +/- 0.0006

[Sun Mar 18 10:26:40 2012] Off-axis axis estimate = 13.27'
[Sun Mar 18 12:46:54 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 12:46:54 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Sun Mar 18 12:46:54 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Sun Mar 18 12:46:54 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.06"
[Sun Mar 18 13:28:20 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Mar 18 13:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_src5.csv
[Sun Mar 18 13:28:20 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Mar 18 13:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_src5.csv
[Sun Mar 18 13:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 13:28:20 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Mar 18 13:28:20 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Mar 18 13:28:20 2012] Fit fullrun_mos1_xmm0555020201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Mar 18 14:31:23 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.207141 pixels away
[Sun Mar 18 14:31:23 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 14:31:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 14:31:23 2012] Assessing source extent using major
[Sun Mar 18 14:31:23 2012] Source does appear to be extended
[Sun Mar 18 14:31:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 16:34:42 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 16:34:42 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Sun Mar 18 16:34:42 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Sun Mar 18 16:34:42 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.06"
[Sun Mar 18 16:54:47 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Mar 18 16:54:47 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Mar 18 16:54:47 2012] Fit fullrun_mos1_xmm0555020201_pi300-10000_cl_pass1_src5 appears to have run properly
[Sun Mar 18 16:54:48 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Mar 18 16:54:48 2012] fullrun_mos1_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Mar 18 16:54:48 2012] Fit fullrun_mos1_xmm0555020201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Mar 18 17:49:14 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.895292 pixels away
[Sun Mar 18 17:49:14 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 17:49:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 17:49:14 2012] Assessing source extent using major
[Sun Mar 18 17:49:14 2012] Source does appear to be extended
[Sun Mar 18 17:49:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:30:07 2012] XMMSAS src. selection expression = ellipse(40407.697418, 32502.164490, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 20:30:07 2012] Writing source region out to fullrun_mos1_xmm0555020201_pi300-10000_pass1_cl_src4_src.reg
[Sun Mar 18 20:30:07 2012] Extracting stamp from image fullrun_mos1_xmm0555020201_pi300-10000_cl_sm2.00.img.gz, (428, 337) - (503, 412)
[Sun Mar 18 20:30:07 2012] XMMSAS bgd. selection expression = annulus(40407.697418, 32502.164490, 1087.500000, 2175.000000, X, Y)
[Sun Mar 18 20:30:07 2012] Writing fullrun_mos1_xmm0555020201_pi300-10000_pass1_cl_src4.gif
[Sun Mar 18 20:36:57 2012] Mean detx,y = (-5.28, 14460.56) 
[Sun Mar 18 20:36:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 20:37:27 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 20:37:27 2012] Setting source spectrum file to fullrun_mos1_xmm0555020201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 18 20:37:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555020201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Mar 18 20:52:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 18 20:52:05 2012] rmf not generated due to insufficient counts
[Sun Mar 18 21:23:46 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:23:46 2012] Error reading totcts from fullrun_mos1_xmm0555020201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 18 21:23:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:23:47 2012] Using photon index=1.80, rate=0.00599, arf fullrun_mos1_xmm0555020201_pi300-10000_pass1_cl_src4.arf
[Sun Mar 18 21:23:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:23:47 2012] Updating source flux to 1.9e-13
[Sun Mar 18 21:23:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting