[Thu Mar 29 10:40:28 2012] Detection parameters:
  Position = (320.7, 313.1) = 22 32 48.60 -20 22 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31987.6 +/- 209.2
  Background counts = 37.1
  Rate = 1 +/- 0.007

[Thu Mar 29 10:40:29 2012] Off-axis axis estimate = 1.93'
[Thu Mar 29 13:44:48 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:44:48 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Thu Mar 29 13:44:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Thu Mar 29 13:44:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.39"
[Thu Mar 29 14:21:34 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 14:21:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 14:21:34 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 14:21:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 14:21:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 14:21:34 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 14:21:34 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 14:21:34 2012] Fit fullrun_mos2_xmm0554934101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 14:21:56 2012] Spatial fit model total counts = 27654.500000, observed total counts = 26856.000000
[Thu Mar 29 14:21:56 2012] Offset between fit and detection position for source 1 = 0.194162 pixels
[Thu Mar 29 14:21:56 2012] 27747.230000 total counts/ 6649.630000 bgd. counts: snr = 258.722568
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.194162 pixels
  Position = (320.5, 313.0) = 22 32 48.66 -20 22 26.7
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 21097.6 +/- 166.6
  Background counts = 6649.6
  Rate = 0.8 +/- 0.006
[Thu Mar 29 14:21:56 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:21:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:21:56 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 14:21:56 2012] Source does appear to be extended
[Thu Mar 29 14:21:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 17:11:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 17:11:55 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Thu Mar 29 17:11:55 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.946
[Thu Mar 29 17:11:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.57"
[Thu Mar 29 17:28:56 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 17:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 17:28:56 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 17:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 17:28:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 17:28:56 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 17:28:57 2012] fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 17:28:57 2012] Fit fullrun_mos2_xmm0554934101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 17:29:16 2012] Spatial fit model total counts = 27608.700000, observed total counts = 26856.000000
[Thu Mar 29 17:29:16 2012] Offset between fit and detection position for source 1 = 0.000134 pixels
[Thu Mar 29 17:29:16 2012] 27699.740000 total counts/ 6611.840000 bgd. counts: snr = 259.341588
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000134 pixels
  Position = (320.5, 313.0) = 22 32 48.66 -20 22 26.7
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 21087.9 +/- 166.4
  Background counts = 6611.8
  Rate = 0.8 +/- 0.006
[Thu Mar 29 17:29:16 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 17:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 17:29:16 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 17:29:16 2012] Source does appear to be extended
[Thu Mar 29 17:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 21:03:22 2012] Counts = 21087.900000, rescaling region sizes by 3.000000
[Thu Mar 29 21:03:22 2012] XMMSAS src. selection expression = ellipse(27836.946400, 27184.741200, 1005.195629, 1005.195629, 0.000000, X, Y)
[Thu Mar 29 21:03:22 2012] Writing source region out to fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 29 21:03:22 2012] Extracting stamp from image fullrun_mos2_xmm0554934101_pi300-10000_cl_sm2.00.img.gz, (263, 255) - (378, 371)
[Thu Mar 29 21:03:22 2012] XMMSAS bgd. selection expression = annulus(27836.946400, 27184.741200, 5025.978145, 10051.956289, X, Y) && !ellipse(34012.318800, 30965.187000, 373.294060, 373.294060, 0.000000, X, Y) && !ellipse(32111.243286, 30842.933136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31926.628000, 31544.541400, 385.176011, 385.176011, 0.000000, X, Y)
[Thu Mar 29 21:03:22 2012] Writing fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1.gif
[Thu Mar 29 21:03:33 2012] Mean detx,y = (-140.41, 237.20) 
[Thu Mar 29 21:03:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 21:09:49 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 21:09:50 2012] Setting source spectrum file to fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 21:09:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 29 21:27:58 2012] Updating aperture counts using extracted products
[Thu Mar 29 21:27:58 2012] Error reading totcts from fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 21:27:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 21:27:59 2012] Using photon index=1.80, rate=0.761, arf fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 21:27:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 21:27:59 2012] Updating source flux to 6.9e-12
[Thu Mar 29 21:29:45 2012] Reading fit data from xmm0554934101/analysis//spectral/fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 29 21:29:45 2012] Spectral fit parameter nH value = 4.11305e+20
[Thu Mar 29 21:29:45 2012] Spectral fit parameter PhoIndex value = 2.07376
[Thu Mar 29 21:29:45 2012] Failed to get F(0.3-8.0) from xmm0554934101/analysis//spectral/fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 21:29:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 21:29:45 2012] Using Nh = 4.1e+20, photon index=2.07, rate=0.761, arf fullrun_mos2_xmm0554934101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 21:29:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 21:29:45 2012] Updating source flux to 6.4e-12