[Thu Mar 29 10:39:48 2012] Detection parameters:
  Position = (320.7, 313.0) = 22 32 48.61 -20 22 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33871.5 +/- 219.4
  Background counts = 43.2
  Rate = 1 +/- 0.007

[Thu Mar 29 10:39:49 2012] Off-axis axis estimate = 1.93'
[Thu Mar 29 13:22:20 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:22:20 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Thu Mar 29 13:22:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.034
[Thu Mar 29 13:22:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.39"
[Thu Mar 29 13:44:47 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 13:44:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 13:44:47 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 13:44:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 13:44:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 13:44:47 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 13:44:47 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 13:44:48 2012] Fit fullrun_mos1_xmm0554934101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 14:21:52 2012] Spatial fit model total counts = 26227.600000, observed total counts = 26231.000000
[Thu Mar 29 14:21:52 2012] Offset between fit and detection position for source 1 = 0.126992 pixels
[Thu Mar 29 14:21:52 2012] 26274.740000 total counts/ 5686.840000 bgd. counts: snr = 273.008737
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.126992 pixels
  Position = (320.5, 313.0) = 22 32 48.65 -20 22 26.9
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 20587.9 +/- 162.1
  Background counts = 5686.8
  Rate = 0.8 +/- 0.006
[Thu Mar 29 14:21:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:21:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:21:52 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 14:21:52 2012] Source does appear to be extended
[Thu Mar 29 14:21:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 16:58:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 16:58:10 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Thu Mar 29 16:58:10 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.892
[Thu Mar 29 16:58:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.80"
[Thu Mar 29 17:11:55 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 17:11:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 17:11:55 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 17:11:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 17:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 17:11:55 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 17:11:55 2012] fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 17:11:55 2012] Fit fullrun_mos1_xmm0554934101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 17:29:14 2012] Spatial fit model total counts = 26228.100000, observed total counts = 26231.000000
[Thu Mar 29 17:29:14 2012] Offset between fit and detection position for source 1 = 0.000021 pixels
[Thu Mar 29 17:29:14 2012] 26275.350000 total counts/ 5690.250000 bgd. counts: snr = 272.889803
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000021 pixels
  Position = (320.5, 313.0) = 22 32 48.65 -20 22 26.9
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 20585.1 +/- 162.1
  Background counts = 5690.2
  Rate = 0.8 +/- 0.006
[Thu Mar 29 17:29:14 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 17:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 17:29:14 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 17:29:14 2012] Source does appear to be extended
[Thu Mar 29 17:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 20:35:26 2012] Counts = 20585.100000, rescaling region sizes by 3.000000
[Thu Mar 29 20:35:26 2012] XMMSAS src. selection expression = ellipse(27839.107200, 27180.632000, 1043.989230, 1043.989230, 0.000000, X, Y)
[Thu Mar 29 20:35:26 2012] Writing source region out to fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 29 20:35:26 2012] Extracting stamp from image fullrun_mos1_xmm0554934101_pi300-10000_cl_sm2.00.img.gz, (261, 253) - (381, 373)
[Thu Mar 29 20:35:26 2012] XMMSAS bgd. selection expression = annulus(27839.107200, 27180.632000, 5219.946150, 10439.892300, X, Y) && !ellipse(34019.095200, 30980.197000, 356.750410, 356.750410, 0.000000, X, Y) && !ellipse(32102.793400, 30835.138000, 282.062408, 282.062408, 0.000000, X, Y) && !ellipse(31911.270200, 31525.394000, 384.104011, 384.104011, 0.000000, X, Y)
[Thu Mar 29 20:35:26 2012] Writing fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1.gif
[Thu Mar 29 20:35:37 2012] Mean detx,y = (451.21, -7.65) 
[Thu Mar 29 20:35:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 20:42:42 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 20:42:43 2012] Setting source spectrum file to fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 20:42:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 29 21:27:57 2012] Updating aperture counts using extracted products
[Thu Mar 29 21:27:57 2012] Error reading totcts from fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 21:27:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 21:27:58 2012] Using photon index=1.80, rate=0.783, arf fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 21:27:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 21:27:58 2012] Updating source flux to 7e-12
[Thu Mar 29 21:28:47 2012] Reading fit data from xmm0554934101/analysis//spectral/fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 29 21:28:47 2012] Spectral fit parameter nH value = 3.97015e+20
[Thu Mar 29 21:28:47 2012] Spectral fit parameter PhoIndex value = 2.09813
[Thu Mar 29 21:28:47 2012] Failed to get F(0.3-8.0) from xmm0554934101/analysis//spectral/fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 21:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 21:28:47 2012] Using Nh = 4e+20, photon index=2.10, rate=0.783, arf fullrun_mos1_xmm0554934101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 21:28:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 21:28:47 2012] Updating source flux to 6.4e-12