[Sun Jun  3 11:13:41 2012] Detection parameters:
  Position = (298.5, 452.4) = 11 27 34.78 25 2 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.9 +/- 15.0
  Background counts = 110.0
  Rate = 0.01 +/- 0.002

[Sun Jun  3 11:13:41 2012] Off-axis axis estimate = 11.16'
[Sun Jun  3 11:16:25 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 11:16:25 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Sun Jun  3 11:16:25 2012] source mask rpix=2.8, npix_max = 42, mask sum = 44, frac = 1.035
[Sun Jun  3 11:16:25 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.01"
[Sun Jun  3 14:08:42 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src42.ximg exists
[Sun Jun  3 14:08:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src42.csv
[Sun Jun  3 14:08:42 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Jun  3 14:08:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src42.csv
[Sun Jun  3 14:08:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:08:43 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Jun  3 14:08:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jun  3 14:08:43 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Jun  3 14:08:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jun  3 14:08:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:11:47 2012] Spatial fit model total counts = 307.685000, observed total counts = 307.000000
[Sun Jun  3 14:11:47 2012] Offset between fit and detection position for source 44 = 2.011671 pixels
[Sun Jun  3 14:11:47 2012] Warning, changing simple spatial fit ID from 42 to 12
[Sun Jun  3 14:11:47 2012] 298.737760 total counts/ 293.492000 bgd. counts: snr = 0.306204
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 2.011671 pixels
  Position = (296.9, 451.1) = 11 27 35.29 25 2 12.3
  Extent = 3.4 (3.0-3.6)", rotation angle = 0
  Source counts = 5.2 +/- 17.3
  Background counts = 293.5
  Rate = 0.003 +/- 0.008
  Deleting source due to low Poisson probability