[Sun Jun  3 11:13:41 2012] Detection parameters:
  Position = (325.4, 301.1) = 11 27 26.20 24 51 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.4 +/- 19.8
  Background counts = 154.3
  Rate = 0.02 +/- 0.004

[Sun Jun  3 11:13:41 2012] Off-axis axis estimate = 1.96'
[Sun Jun  3 11:16:25 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 11:16:25 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Sun Jun  3 11:16:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.030
[Sun Jun  3 11:16:25 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.41"
[Sun Jun  3 14:08:42 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun  3 14:08:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src31.csv
[Sun Jun  3 14:08:42 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun  3 14:08:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src31.csv
[Sun Jun  3 14:08:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:08:43 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun  3 14:08:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun  3 14:08:43 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun  3 14:08:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun  3 14:08:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:11:47 2012] Spatial fit model total counts = 388.954000, observed total counts = 350.000000
[Sun Jun  3 14:11:47 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 14:11:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 14:11:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 14:11:47 2012] Assessing source extent using major
[Sun Jun  3 14:11:47 2012] Source does appear to be extended
[Sun Jun  3 14:11:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 14:11:55 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:11:55 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Sun Jun  3 14:11:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.030
[Sun Jun  3 14:11:55 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.41"
[Sun Jun  3 16:26:00 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src28.ximg exists
[Sun Jun  3 16:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src28.csv
[Sun Jun  3 16:26:00 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Jun  3 16:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src28.csv
[Sun Jun  3 16:26:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 16:26:00 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Jun  3 16:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun  3 16:26:00 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Jun  3 16:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun  3 16:26:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 16:28:12 2012] Spatial fit model total counts = 391.533000, observed total counts = 350.000000
[Sun Jun  3 16:28:12 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 16:28:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 16:28:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 16:28:12 2012] Assessing source extent using major
[Sun Jun  3 16:28:12 2012] Source does appear to be extended
[Sun Jun  3 16:28:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 16:28:20 2012] XMMSAS src. selection expression = ellipse(28259.024109, 26143.446320, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  3 16:28:20 2012] Writing source region out to fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src33_src.reg
[Sun Jun  3 16:28:20 2012] Extracting stamp from image fullrun_pn_xmm0554933401_pi300-10000_cl_sm2.00.img.gz, (288, 264) - (363, 339)
[Sun Jun  3 16:28:20 2012] XMMSAS bgd. selection expression = annulus(28259.024109, 26143.446320, 1087.500000, 2175.000000, X, Y) && !ellipse(27161.636780, 28887.809387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26552.952728, 28583.426208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27182.630096, 27789.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.630249, 27363.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27964.602600, 27409.127991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.436676, 26757.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30222.697052, 25846.523773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29523.317200, 26036.724762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.024017, 26305.719055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.829193, 25442.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29992.511322, 25365.097931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30433.315216, 25149.897186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29434.392303, 25189.900513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28132.822601, 24439.589233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27974.606750, 24916.344879, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 16:28:20 2012] Writing fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src33.gif
[Sun Jun  3 16:44:12 2012] Mean detx,y = (-3247.97, 955.27) 
[Sun Jun  3 16:44:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 16:44:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 16:44:27 2012] Setting source spectrum file to fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jun  3 16:44:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jun  3 17:01:15 2012] Not generating rmf since there are only 82 counts
[Sun Jun  3 17:01:15 2012] rmf not generated due to insufficient counts
[Sun Jun  3 17:13:27 2012] Updating aperture counts using extracted products
[Sun Jun  3 17:13:27 2012] Error reading totcts from fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jun  3 17:13:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 17:13:28 2012] Using photon index=1.80, rate=0.0182, arf fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src33.arf
[Sun Jun  3 17:13:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 17:13:28 2012] Updating source flux to 5.6e-14
[Sun Jun  3 17:13:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting