[Sun Jun  3 11:13:40 2012] Detection parameters:
  Position = (291.9, 274.3) = 11 27 36.88 24 49 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3382.1 +/- 71.1
  Background counts = 122.9
  Rate = 0.6 +/- 0.01

[Sun Jun  3 11:13:41 2012] Off-axis axis estimate = 1.81'
[Sun Jun  3 11:16:25 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 11:16:25 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jun  3 11:16:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Sun Jun  3 11:16:25 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.34"
[Sun Jun  3 14:08:41 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  3 14:08:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  3 14:08:41 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  3 14:08:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  3 14:08:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:08:42 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  3 14:08:42 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  3 14:08:42 2012] Fit fullrun_pn_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun  3 14:11:47 2012] Spatial fit model total counts = 2421.670000, observed total counts = 2373.000000
[Sun Jun  3 14:11:47 2012] Offset between fit and detection position for source 3 = 0.164618 pixels
[Sun Jun  3 14:11:47 2012] 2414.105000 total counts/ 882.155000 bgd. counts: snr = 51.578908
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.164618 pixels
  Position = (291.9, 274.4) = 11 27 36.89 24 49 23.9
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source counts = 1532.0 +/- 49.1
  Background counts = 882.2
  Rate = 0.7 +/- 0.02
[Sun Jun  3 14:11:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 14:11:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 14:11:47 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 14:11:47 2012] Source does appear to be extended
[Sun Jun  3 14:11:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 14:11:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:11:55 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Sun Jun  3 14:11:55 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.993
[Sun Jun  3 14:11:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.39"
[Sun Jun  3 16:25:59 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  3 16:25:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src3.csv
[Sun Jun  3 16:25:59 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  3 16:25:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src3.csv
[Sun Jun  3 16:25:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 16:26:00 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  3 16:26:00 2012] fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  3 16:26:00 2012] Fit fullrun_pn_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun  3 16:28:12 2012] Spatial fit model total counts = 2424.520000, observed total counts = 2373.000000
[Sun Jun  3 16:28:12 2012] Offset between fit and detection position for source 3 = 0.000109 pixels
[Sun Jun  3 16:28:12 2012] 2416.962000 total counts/ 882.722000 bgd. counts: snr = 51.639416
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000109 pixels
  Position = (291.9, 274.4) = 11 27 36.89 24 49 23.9
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source counts = 1534.2 +/- 49.2
  Background counts = 882.7
  Rate = 0.7 +/- 0.02
[Sun Jun  3 16:28:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 16:28:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 16:28:12 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 16:28:12 2012] Source does appear to be extended
[Sun Jun  3 16:28:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 16:28:19 2012] Counts = 1534.240000, rescaling region sizes by 2.000000
[Sun Jun  3 16:28:19 2012] XMMSAS src. selection expression = ellipse(25350.259540, 23826.966200, 646.518019, 646.518019, 0.000000, X, Y)
[Sun Jun  3 16:28:19 2012] Writing source region out to fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  3 16:28:19 2012] Extracting stamp from image fullrun_pn_xmm0554933401_pi300-10000_cl_sm2.00.img.gz, (255, 237) - (329, 312)
[Sun Jun  3 16:28:19 2012] XMMSAS bgd. selection expression = annulus(25350.259540, 23826.966200, 2155.060062, 4310.120124, X, Y) && !ellipse(27161.636780, 28887.809387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26552.952728, 28583.426208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27182.630096, 27789.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.630249, 27363.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27964.602600, 27409.127991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.436676, 26757.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.024109, 26143.446320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30222.697052, 25846.523773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29523.317200, 26036.724762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.024017, 26305.719055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.829193, 25442.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29992.511322, 25365.097931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30433.315216, 25149.897186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29434.392303, 25189.900513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28132.822601, 24439.589233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27974.606750, 24916.344879, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 16:28:19 2012] Writing fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3.gif
[Sun Jun  3 16:29:21 2012] Mean detx,y = (149.57, -327.05) 
[Sun Jun  3 16:29:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 16:30:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 16:30:28 2012] Setting source spectrum file to fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 16:30:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  3 17:13:27 2012] Updating aperture counts using extracted products
[Sun Jun  3 17:13:27 2012] Error reading totcts from fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 17:13:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 17:13:28 2012] Using photon index=1.80, rate=0.749, arf fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 17:13:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 17:13:28 2012] Updating source flux to 1.8e-12
[Sun Jun  3 17:14:15 2012] Reading fit data from xmm0554933401/analysis//spectral/fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jun  3 17:14:15 2012] Spectral fit parameter nH value = 5.90188e+20
[Sun Jun  3 17:14:15 2012] Spectral fit parameter PhoIndex value = 1.88073
[Sun Jun  3 17:14:15 2012] Failed to get F(0.3-8.0) from xmm0554933401/analysis//spectral/fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 17:14:15 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 17:14:15 2012] Using Nh = 5.9e+20, photon index=1.88, rate=0.749, arf fullrun_pn_xmm0554933401_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 17:14:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 17:14:15 2012] Updating source flux to 2e-12