[Sun Jun  3 11:14:12 2012] Detection parameters:
  Position = (291.7, 274.3) = 11 27 36.95 24 49 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2927.2 +/- 65.1
  Background counts = 81.3
  Rate = 0.4 +/- 0.008

[Sun Jun  3 11:14:12 2012] Off-axis axis estimate = 1.81'
[Sun Jun  3 14:10:17 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:10:17 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jun  3 14:10:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Sun Jun  3 14:10:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Sun Jun  3 14:11:37 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 14:11:37 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 14:11:37 2012] Fit fullrun_mos2_xmm0554933401_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun  3 14:11:37 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 14:11:37 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 14:11:37 2012] Fit fullrun_mos2_xmm0554933401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  3 14:11:48 2012] Spatial fit model total counts = 1436.580000, observed total counts = 1385.000000
[Sun Jun  3 14:11:48 2012] Offset between fit and detection position for source 1 = 0.209222 pixels
[Sun Jun  3 14:11:48 2012] 1442.157000 total counts/ 477.469000 bgd. counts: snr = 44.148331
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.209222 pixels
  Position = (291.8, 274.5) = 11 27 36.93 24 49 24.3
  Extent = 5.5 (5.1-5.9)" x 4.9 (4.6-5.3)", rotation angle = 350 (317-18) degrees
  Source counts = 964.7 +/- 38.0
  Background counts = 477.5
  Rate = 0.2 +/- 0.01
[Sun Jun  3 14:11:48 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 14:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 14:11:48 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 14:11:48 2012] Source does appear to be extended
[Sun Jun  3 14:11:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Sun Jun  3 16:27:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 16:27:14 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Sun Jun  3 16:27:14 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.779
[Sun Jun  3 16:27:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.22"
[Sun Jun  3 16:28:04 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 16:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 16:28:04 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 16:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 16:28:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 16:28:04 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 16:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  3 16:28:04 2012] fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 16:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  3 16:28:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554933401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 16:28:13 2012] Warning, spatial fit 1 centroid is now closest to src. 43
[Sun Jun  3 16:28:13 2012] Source 1 in spatial fitting is no longer close to this source
[Sun Jun  3 16:28:13 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 16:28:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 16:28:13 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 16:28:13 2012] Source does appear to be extended
[Sun Jun  3 16:28:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Sun Jun  3 17:08:53 2012] XMMSAS src. selection expression = ellipse(25337.395200, 23835.722800, 330.058809, 296.062209, 350.331190, X, Y)
[Sun Jun  3 17:08:53 2012] Writing source region out to fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  3 17:08:53 2012] Extracting stamp from image fullrun_mos2_xmm0554933401_pi300-10000_cl_sm2.00.img.gz, (273, 256) - (311, 294)
[Sun Jun  3 17:08:53 2012] XMMSAS bgd. selection expression = annulus(25337.395200, 23835.722800, 550.098016, 1100.196032, X, Y)
[Sun Jun  3 17:08:53 2012] Writing fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1.gif
[Sun Jun  3 17:08:55 2012] Mean detx,y = (-4.96, 173.30) 
[Sun Jun  3 17:08:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 17:09:05 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 17:09:05 2012] Setting source spectrum file to fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 17:09:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  3 17:13:28 2012] Updating aperture counts using extracted products
[Sun Jun  3 17:13:28 2012] Error reading totcts from fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 17:13:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 17:13:28 2012] Using photon index=1.80, rate=0.246, arf fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1.arf
[Sun Jun  3 17:13:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 17:13:28 2012] Updating source flux to 3.3e-12
[Sun Jun  3 17:13:44 2012] Reading fit data from xmm0554933401/analysis//spectral/fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun  3 17:13:44 2012] Spectral fit parameter nH value = 5.62423e+20
[Sun Jun  3 17:13:44 2012] Spectral fit parameter PhoIndex value = 1.85045
[Sun Jun  3 17:13:44 2012] Failed to get F(0.3-8.0) from xmm0554933401/analysis//spectral/fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 17:13:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 17:13:44 2012] Using Nh = 5.6e+20, photon index=1.85, rate=0.246, arf fullrun_mos2_xmm0554933401_pi300-10000_pass1_cl_src1.arf
[Sun Jun  3 17:13:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 17:13:45 2012] Updating source flux to 3.4e-12