[Thu Aug 23 10:24:51 2012] Detection parameters:
  Position = (309.2, 318.8) = 4 53 31.08 -55 51 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33391.7 +/- 216.8
  Background counts = 97.5
  Rate = 2 +/- 0.01

[Thu Aug 23 10:24:51 2012] Off-axis axis estimate = 1.67'
[Thu Aug 23 11:19:31 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 11:19:31 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Aug 23 11:19:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Aug 23 11:19:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Aug 23 11:34:49 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 23 11:34:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 11:34:49 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 23 11:34:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 11:34:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 11:34:50 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 23 11:34:50 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 23 11:34:50 2012] Fit fullrun_mos2_xmm0554930501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 23 11:34:57 2012] Spatial fit model total counts = 26664.700000, observed total counts = 26448.000000
[Thu Aug 23 11:34:57 2012] Offset between fit and detection position for source 1 = 0.086686 pixels
[Thu Aug 23 11:34:57 2012] 26209.720000 total counts/ 2126.620000 bgd. counts: snr = 522.236764
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.086686 pixels
  Position = (309.1, 318.7) = 4 53 31.12 -55 51 32.5
  Extent = 7.6 (7.6-7.6)", rotation angle = 0
  Source counts = 24083.1 +/- 161.9
  Background counts = 2126.6
  Rate = 2 +/- 0.01
[Thu Aug 23 11:34:57 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 11:34:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 11:34:57 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 11:34:57 2012] Source does appear to be extended
[Thu Aug 23 11:34:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 11:34:57 2012] Source is confused with source 6
[Thu Aug 23 12:00:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 12:00:54 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Thu Aug 23 12:00:54 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.997
[Thu Aug 23 12:00:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.57"
[Thu Aug 23 12:13:34 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 23 12:13:34 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 23 12:13:34 2012] Fit fullrun_mos2_xmm0554930501_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Aug 23 12:13:34 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 23 12:13:34 2012] fullrun_mos2_xmm0554930501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 23 12:13:34 2012] Fit fullrun_mos2_xmm0554930501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 23 12:13:38 2012] Spatial fit model total counts = 27846.600000, observed total counts = 26515.000000
[Thu Aug 23 12:13:38 2012] Offset between fit and detection position for source 1 = 0.209298 pixels
[Thu Aug 23 12:13:38 2012] 28048.470000 total counts/ 7495.370000 bgd. counts: snr = 237.400045
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.209298 pixels
  Position = (309.0, 318.5) = 4 53 31.18 -55 51 33.3
  Extent = 6.7 (6.6-6.8)" x 5.2 (5.2-5.3)", rotation angle = 145 (143-147) degrees
  Source counts = 20553.1 +/- 167.5
  Background counts = 7495.4
  Rate = 1 +/- 0.01
[Thu Aug 23 12:13:38 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 12:13:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 12:13:38 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 12:13:38 2012] Source does appear to be extended
[Thu Aug 23 12:13:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Thu Aug 23 12:41:47 2012] Counts = 20553.100000, rescaling region sizes by 3.000000
[Thu Aug 23 12:41:47 2012] XMMSAS src. selection expression = ellipse(26833.680978, 27664.704000, 1210.989635, 942.885027, 144.636000, X, Y)
[Thu Aug 23 12:41:47 2012] Writing source region out to fullrun_mos2_xmm0554930501_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 23 12:41:47 2012] Extracting stamp from image fullrun_mos2_xmm0554930501_pi300-10000_cl_sm2.00.img.gz, (239, 249) - (379, 388)
[Thu Aug 23 12:41:47 2012] XMMSAS bgd. selection expression = annulus(26833.680978, 27664.704000, 6054.948174, 12109.896348, X, Y) && !ellipse(27319.491547, 28039.832855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27493.860596, 27196.375183, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 12:41:47 2012] Writing fullrun_mos2_xmm0554930501_pi300-10000_pass1_cl_src1.gif
[Thu Aug 23 12:41:54 2012] Mean detx,y = (9.94, -58.09) 
[Thu Aug 23 12:41:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 12:46:28 2012] grppha failed
[Thu Aug 23 12:46:28 2012] Setting source spectrum file to fullrun_mos2_xmm0554930501_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 12:46:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554930501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 23 12:47:31 2012] Updating aperture counts using extracted products
[Thu Aug 23 12:47:31 2012] Error reading totcts from fullrun_mos2_xmm0554930501_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 12:47:31 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 12:47:33 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Aug 23 12:47:33 2012] Source 1 has no response, skipping
[Thu Aug 23 12:47:34 2012] xmm0554930501/analysis//spectral/fullrun_mos2_xmm0554930501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete