[Mon Sep  9 05:00:41 2013] Detection parameters:
  Position = (289.6, 312.9) = 2 6 13.28 -0 15 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.8 +/- 16.9
  Background counts = 33.9
  Rate = 0.008 +/- 0.001

[Mon Sep  9 05:00:41 2013] Off-axis axis estimate = 1.23'
[Mon Sep  9 05:00:52 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:52 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Mon Sep  9 05:00:52 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Mon Sep  9 05:00:52 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.04"
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes