[Mon Sep  9 05:00:41 2013] Detection parameters:
  Position = (284.8, 315.8) = 2 6 14.69 -0 15 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.9 +/- 14.5
  Background counts = 35.0
  Rate = 0.006 +/- 0.001

[Mon Sep  9 05:00:41 2013] Off-axis axis estimate = 1.60'
[Mon Sep  9 05:00:52 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:52 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Mon Sep  9 05:00:52 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Mon Sep  9 05:00:52 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.23"
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src2.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Sep  9 05:00:52 2013] Warning: total counts is not > 0
[Mon Sep  9 05:00:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes