[Mon Sep  9 05:00:42 2013] Detection parameters:
  Position = (329.9, 363.0) = 2 6 1.60 -0 11 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 13.1
  Background counts = 7.4
  Rate = 0.008 +/- 0.001

[Mon Sep  9 05:00:42 2013] Off-axis axis estimate = 5.21'
[Mon Sep  9 05:00:53 2013] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:53 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Mon Sep  9 05:00:53 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.130
[Mon Sep  9 05:00:53 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.03"
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src3.csv
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src3.csv
[Mon Sep  9 05:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep  9 05:00:53 2013] Fit fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly