[Mon Sep  9 05:00:42 2013] Detection parameters:
  Position = (161.0, 273.3) = 2 6 50.57 -0 18 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.8 +/- 8.8
  Background counts = 6.9
  Rate = 0.004 +/- 0.0009

[Mon Sep  9 05:00:42 2013] Off-axis axis estimate = 10.13'
[Mon Sep  9 05:00:53 2013] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  9 05:00:53 2013] Initial guess for spatial extent in simple fitting = 11.49"
[Mon Sep  9 05:00:53 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912
[Mon Sep  9 05:00:53 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.49"
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src8.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src8.csv
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src8.csv
[Mon Sep  9 05:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Sep  9 05:00:53 2013] Fit fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly