[Mon Sep  9 05:00:42 2013] Detection parameters:
  Position = (305.3, 280.8) = 2 6 8.74 -0 17 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.3 +/- 10.1
  Background counts = 11.0
  Rate = 0.002 +/- 0.0006

[Mon Sep  9 05:00:42 2013] Off-axis axis estimate = 1.37'
[Mon Sep  9 05:00:53 2013] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:53 2013] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Sep  9 05:00:53 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Mon Sep  9 05:00:53 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.12"
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src17.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src17.csv
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src17.csv
[Mon Sep  9 05:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Sep  9 05:00:53 2013] Fit fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly