[Mon Sep  9 05:00:42 2013] Detection parameters:
  Position = (255.4, 297.8) = 2 6 23.21 -0 16 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 9.8
  Background counts = 10.7
  Rate = 0.003 +/- 0.0006

[Mon Sep  9 05:00:42 2013] Off-axis axis estimate = 3.12'
[Mon Sep  9 05:00:53 2013] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:53 2013] Initial guess for spatial extent in simple fitting = 7.99"
[Mon Sep  9 05:00:53 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.145
[Mon Sep  9 05:00:53 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.99"
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src15.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src15.csv
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src15.csv
[Mon Sep  9 05:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Sep  9 05:00:53 2013] Fit fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly