[Mon Sep  9 05:00:41 2013] Detection parameters:
  Position = (280.6, 283.0) = 2 6 15.89 -0 17 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40977.7 +/- 238.0
  Background counts = 12.6
  Rate = 2 +/- 0.01

[Mon Sep  9 05:00:42 2013] Off-axis axis estimate = 1.71'
[Mon Sep  9 05:00:53 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:53 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Sep  9 05:00:53 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Mon Sep  9 05:00:53 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src1.csv
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src1.csv
[Mon Sep  9 05:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep  9 05:00:53 2013] fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep  9 05:00:53 2013] Fit fullrun_mos2_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly