[Mon Sep  9 05:00:41 2013] Detection parameters:
  Position = (126.4, 294.9) = 2 7 0.61 -0 16 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.4 +/- 7.9
  Background counts = 7.2
  Rate = 0.003 +/- 0.0009

[Mon Sep  9 05:00:41 2013] Off-axis axis estimate = 12.47'
[Mon Sep  9 05:00:52 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  9 05:00:52 2013] Initial guess for spatial extent in simple fitting = 12.67"
[Mon Sep  9 05:00:52 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Mon Sep  9 05:00:52 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 12.67"
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src4.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src4.csv
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src4.csv
[Mon Sep  9 05:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Sep  9 05:00:53 2013] Fit fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly