[Mon Sep  9 05:00:41 2013] Detection parameters:
  Position = (342.7, 135.5) = 2 5 57.88 -0 28 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.0 +/- 7.5
  Background counts = 6.2
  Rate = 0.002 +/- 0.0004

[Mon Sep  9 05:00:41 2013] Off-axis axis estimate = 12.24'
[Mon Sep  9 05:00:52 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Mon Sep  9 05:00:52 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Mon Sep  9 05:00:52 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Mon Sep  9 05:00:52 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 12.55"
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src10.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src10.csv
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Sep  9 05:00:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src10.csv
[Mon Sep  9 05:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Sep  9 05:00:53 2013] fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Sep  9 05:00:53 2013] Fit fullrun_mos1_xmm0554920301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly