[Thu Aug 30 19:35:58 2012] Detection parameters:
  Position = (314.7, 315.9) = 4 33 48.74 18 10 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11174.4 +/- 126.7
  Background counts = 65.1
  Rate = 0.3 +/- 0.004

[Thu Aug 30 19:35:59 2012] Off-axis axis estimate = 1.73'
[Thu Aug 30 19:38:26 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 19:38:26 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Aug 30 19:38:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Thu Aug 30 19:38:26 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Thu Aug 30 21:07:30 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug 30 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src3.csv
[Thu Aug 30 21:07:30 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug 30 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src3.csv
[Thu Aug 30 21:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 21:07:31 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug 30 21:07:31 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug 30 21:07:31 2012] Fit fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Aug 30 22:14:53 2012] Spatial fit model total counts = 9667.110000, observed total counts = 9625.000000
[Thu Aug 30 22:14:53 2012] Offset between fit and detection position for source 3 = 0.150951 pixels
[Thu Aug 30 22:14:53 2012] 9735.350000 total counts/ 2467.790000 bgd. counts: snr = 146.296699
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.150951 pixels
  Position = (314.5, 315.9) = 4 33 48.78 18 10 9.6
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 7267.6 +/- 98.7
  Background counts = 2467.8
  Rate = 0.2 +/- 0.003
[Thu Aug 30 22:14:53 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 22:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 22:14:53 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 22:14:53 2012] Source does appear to be extended
[Thu Aug 30 22:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 22:15:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 30 22:15:08 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Thu Aug 30 22:15:08 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.946
[Thu Aug 30 22:15:08 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.57"
[Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Aug 30 23:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src3.csv
[Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Aug 30 23:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src3.csv
[Thu Aug 30 23:33:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Aug 30 23:33:01 2012] Fit fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 31 00:16:25 2012] Warning, spatial fit 3 centroid is now closest to src. 28
[Fri Aug 31 00:16:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:16:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:16:25 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:16:25 2012] Source does appear to be extended
[Fri Aug 31 00:16:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:16:39 2012] Counts = 7267.560000, rescaling region sizes by 2.000000
[Fri Aug 31 00:16:39 2012] XMMSAS src. selection expression = ellipse(27316.924200, 27431.868620, 668.469619, 668.469619, 0.000000, X, Y)
[Fri Aug 31 00:16:39 2012] Writing source region out to fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 31 00:16:39 2012] Extracting stamp from image fullrun_pn_xmm0554770101_pi300-10000_cl_sm2.00.img.gz, (276, 277) - (353, 354)
[Fri Aug 31 00:16:39 2012] XMMSAS bgd. selection expression = annulus(27316.924200, 27431.868620, 2228.232064, 4456.464128, X, Y) && !ellipse(29345.023560, 26196.284200, 393.856811, 393.856811, 0.000000, X, Y) && !ellipse(28916.003143, 32594.094879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31310.168000, 28778.098000, 1486.896043, 1486.896043, 0.000000, X, Y) && !ellipse(25989.690918, 29183.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28097.916931, 26762.349579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33259.683537, 25270.260706, 1519.240044, 611.813200, 100.604697, X, Y) && !ellipse(26511.355644, 23231.990578, 445.848531, 398.357925, 87.591135, X, Y) && !ellipse(32847.240080, 22814.395600, 1534.000044, 430.408812, 100.177000, X, Y) && !ellipse(32696.726091, 21797.533033, 2444.704070, 485.828177, 99.720756, X, Y) && !ellipse(32848.091600, 21967.986000, 1222.352035, 1222.352035, 0.000000, X, Y)
[Fri Aug 31 00:16:39 2012] Writing fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src3.gif
[Fri Aug 31 00:21:25 2012] Mean detx,y = (78.33, -253.34) 
[Fri Aug 31 00:21:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 00:22:10 2012] grppha failed
[Fri Aug 31 00:22:10 2012] Setting source spectrum file to fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 00:22:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 31 01:02:20 2012] Updating aperture counts using extracted products
[Fri Aug 31 01:02:20 2012] Error reading totcts from fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 01:02:21 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 01:02:24 2012] Source 3 has no response, skipping
[Fri Aug 31 01:02:25 2012] xmm0554770101/analysis//spectral/fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete