[Thu Aug 30 19:35:58 2012] Detection parameters: Position = (366.0, 189.2) = 4 33 33.10 18 0 59.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 84757.7 +/- 346.6 Background counts = 66.4 Rate = 2 +/- 0.009 [Thu Aug 30 19:35:59 2012] Off-axis axis estimate = 9.31' [Thu Aug 30 19:38:26 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting [Thu Aug 30 19:38:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Aug 30 19:38:26 2012] Initial guess for spatial extent in simple fitting = 11.08" [Thu Aug 30 19:38:26 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969 [Thu Aug 30 19:38:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.08" [Thu Aug 30 21:07:30 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src1.ximg exists [Thu Aug 30 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src1.csv [Thu Aug 30 21:07:30 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src1_1.ximg exists [Thu Aug 30 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src1.csv [Thu Aug 30 21:07:30 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 30 21:07:31 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Thu Aug 30 21:07:31 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Thu Aug 30 21:07:31 2012] Fit fullrun_pn_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Thu Aug 30 22:14:53 2012] Spatial fit model total counts = 78296.500000, observed total counts = 78380.000000 [Thu Aug 30 22:14:53 2012] Offset between fit and detection position for source 1 = 0.251329 pixels [Thu Aug 30 22:14:53 2012] 78350.300000 total counts/ 13473.000000 bgd. counts: snr = 558.934108 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.251329 pixels Position = (366.0, 189.5) = 4 33 33.11 18 0 59.8 Extent = 7.7 (7.7-7.7)", rotation angle = 0 Source counts = 64877.3 +/- 279.9 Background counts = 13473.0 Rate = 2 +/- 0.008 [Thu Aug 30 22:14:53 2012] Vigneting correction estimate = 1.000000 [Thu Aug 30 22:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 30 22:14:53 2012] Assessing source extent using major axis lower bound [Thu Aug 30 22:14:53 2012] Source does appear to be extended [Thu Aug 30 22:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 30 22:15:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Aug 30 22:15:08 2012] Initial guess for spatial extent in simple fitting = 7.68" [Thu Aug 30 22:15:08 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975 [Thu Aug 30 22:15:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.68" [Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src1.ximg exists [Thu Aug 30 23:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src1.csv [Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src1_1.ximg exists [Thu Aug 30 23:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src1.csv [Thu Aug 30 23:33:01 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Thu Aug 30 23:33:01 2012] fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Thu Aug 30 23:33:01 2012] Fit fullrun_pn_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Fri Aug 31 00:16:25 2012] Spatial fit model total counts = 75001.000000, observed total counts = 75001.000000 [Fri Aug 31 00:16:25 2012] Offset between fit and detection position for source 1 = 0.028684 pixels [Fri Aug 31 00:16:25 2012] 75170.600000 total counts/ 13451.200000 bgd. counts: snr = 532.158717 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.028684 pixels Position = (366.0, 189.5) = 4 33 33.11 18 0 59.6 Extent = 7.1 (7.1-7.1)", rotation angle = 0 Source counts = 61719.4 +/- 274.2 Background counts = 13451.2 Rate = 2 +/- 0.008 [Fri Aug 31 00:16:25 2012] Vigneting correction estimate = 1.000000 [Fri Aug 31 00:16:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Aug 31 00:16:25 2012] Assessing source extent using major axis lower bound [Fri Aug 31 00:16:25 2012] Source does appear to be extended [Fri Aug 31 00:16:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Aug 31 00:16:39 2012] Counts = 61719.400000, rescaling region sizes by 3.000000 [Fri Aug 31 00:16:39 2012] XMMSAS src. selection expression = ellipse(31790.015000, 16433.812000, 1277.972142, 1277.972142, 0.000000, X, Y) [Fri Aug 31 00:16:39 2012] Writing source region out to fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src1_src.reg [Fri Aug 31 00:16:39 2012] Extracting stamp from image fullrun_pn_xmm0554770101_pi300-10000_cl_sm2.00.img.gz, (293, 116) - (439, 263) [Fri Aug 31 00:16:39 2012] XMMSAS bgd. selection expression = annulus(31790.015000, 16433.812000, 6389.860711, 12779.721422, X, Y) && !ellipse(27316.924200, 27431.868620, 445.646413, 445.646413, 0.000000, X, Y) && !ellipse(29345.023560, 26196.284200, 393.856811, 393.856811, 0.000000, X, Y) && !ellipse(36511.959656, 25258.466644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26148.466980, 19167.942276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35786.427765, 23860.901703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37327.757000, 29549.736000, 336.460810, 336.460810, 0.000000, X, Y) && !ellipse(36734.005066, 29299.349548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31310.168000, 28778.098000, 1486.896043, 1486.896043, 0.000000, X, Y) && !ellipse(25989.690918, 29183.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33499.510315, 26735.687775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28097.916931, 26762.349579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33405.821012, 26301.644628, 1519.240044, 359.466200, 101.537525, X, Y) && !ellipse(21869.755000, 26059.916600, 453.043213, 453.043213, 0.000000, X, Y) && !ellipse(33317.056400, 25733.905000, 1519.240044, 519.352815, 100.487100, X, Y) && !ellipse(33259.683537, 25270.260706, 1519.240044, 611.813200, 100.604697, X, Y) && !ellipse(33079.298828, 24403.162231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31274.093964, 13255.834549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33008.764160, 23845.730400, 853.528025, 853.528025, 0.000000, X, Y) && !ellipse(36843.606580, 23217.005400, 338.735210, 338.735210, 0.000000, X, Y) && !ellipse(26511.355644, 23231.990578, 445.848531, 398.357925, 87.591135, X, Y) && !ellipse(32847.240080, 22814.395600, 1534.000044, 430.408812, 100.177000, X, Y) && !ellipse(32696.726091, 21797.533033, 2444.704070, 485.828177, 99.720756, X, Y) && !ellipse(32848.091600, 21967.986000, 1222.352035, 1222.352035, 0.000000, X, Y) && !ellipse(32587.976900, 21246.784760, 1574.016045, 443.788013, 102.859400, X, Y) && !ellipse(32606.473631, 21167.732970, 1192.022964, 707.091157, 107.582028, X, Y) && !ellipse(32399.545740, 20130.196000, 1602.800046, 379.967211, 101.287100, X, Y) && !ellipse(32349.094000, 19651.956000, 1056.704030, 1056.704030, 0.000000, X, Y) && !ellipse(32076.771400, 18415.210000, 811.728023, 811.728023, 0.000000, X, Y) && !ellipse(32027.522247, 17949.229401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19604.354560, 17822.481400, 605.685617, 605.685617, 0.000000, X, Y) && !ellipse(22048.136642, 17553.225143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29356.788452, 17615.525406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33490.002655, 17261.700272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33483.195160, 16474.427002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29176.397797, 16223.923660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25551.637634, 15852.135925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29983.861237, 16318.588730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31150.377563, 12476.668411, 870.000000, 870.000000, 0.000000, X, Y) [Fri Aug 31 00:16:39 2012] Writing fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src1.gif [Fri Aug 31 00:16:59 2012] Mean detx,y = (6284.64, 9861.92) [Fri Aug 31 00:17:03 2012] Setting backscal keywords in source and bgd. spectrum [Fri Aug 31 00:19:33 2012] grppha failed [Fri Aug 31 00:19:33 2012] Setting source spectrum file to fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src1_src.pi.gz [Fri Aug 31 00:19:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Fri Aug 31 01:02:20 2012] Updating aperture counts using extracted products [Fri Aug 31 01:02:20 2012] Error reading totcts from fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src1_src.pi.gz [Fri Aug 31 01:02:21 2012] No arf file for this source, not re-computing flux [Fri Aug 31 01:02:24 2012] Source 1 has no response, skipping [Fri Aug 31 01:02:25 2012] xmm0554770101/analysis//spectral/fullrun_pn_xmm0554770101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete