[Thu Aug 30 19:36:31 2012] Detection parameters:
  Position = (326.6, 302.5) = 4 33 45.11 18 9 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.9 +/- 10.1
  Background counts = 20.1
  Rate = 0.0009 +/- 0.0002

[Thu Aug 30 19:36:31 2012] Off-axis axis estimate = 2.06'
[Thu Aug 30 21:35:07 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 21:35:07 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Thu Aug 30 21:35:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.274
[Thu Aug 30 21:35:07 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.46"
[Thu Aug 30 22:14:45 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Aug 30 22:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src28.csv
[Thu Aug 30 22:14:45 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Aug 30 22:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src28.csv
[Thu Aug 30 22:14:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 22:14:45 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Aug 30 22:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Aug 30 22:14:45 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Aug 30 22:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Aug 30 22:14:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 22:14:59 2012] Spatial fit model total counts = 274.617000, observed total counts = 318.000000
[Thu Aug 30 22:14:59 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 30 22:14:59 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 22:14:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 22:14:59 2012] Assessing source extent using major
[Thu Aug 30 22:14:59 2012] Source does appear to be extended
[Thu Aug 30 22:14:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 22:14:59 2012] Deleting source due to low Poisson probability 0.9