[Thu Aug 30 19:36:30 2012] Detection parameters:
  Position = (157.8, 214.0) = 4 34 36.60 18 2 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3508.7 +/- 71.2
  Background counts = 15.6
  Rate = 0.07 +/- 0.001

[Thu Aug 30 19:36:31 2012] Off-axis axis estimate = 11.89'
[Thu Aug 30 21:35:07 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 21:35:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 30 21:35:07 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Thu Aug 30 21:35:07 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Thu Aug 30 21:35:07 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.38"
[Thu Aug 30 22:14:44 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug 30 22:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src3.csv
[Thu Aug 30 22:14:44 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug 30 22:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src3.csv
[Thu Aug 30 22:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 22:14:45 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug 30 22:14:45 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug 30 22:14:45 2012] Fit fullrun_mos2_xmm0554770101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Aug 30 22:14:59 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.537712 pixels away
[Thu Aug 30 22:14:59 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 22:14:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 22:14:59 2012] Assessing source extent using major
[Thu Aug 30 22:14:59 2012] Source does appear to be extended
[Thu Aug 30 22:14:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 23:57:13 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 23:57:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 30 23:57:13 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Thu Aug 30 23:57:13 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Thu Aug 30 23:57:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.38"
[Fri Aug 31 00:16:18 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 31 00:16:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 00:16:18 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 31 00:16:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 00:16:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:16:18 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 31 00:16:18 2012] fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 31 00:16:18 2012] Fit fullrun_mos2_xmm0554770101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 31 00:16:30 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.649470 pixels away
[Fri Aug 31 00:16:30 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:16:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:16:30 2012] Assessing source extent using major
[Fri Aug 31 00:16:30 2012] Source does appear to be extended
[Fri Aug 31 00:16:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:54:51 2012] Counts = 3508.653320, rescaling region sizes by 2.000000
[Fri Aug 31 00:54:51 2012] XMMSAS src. selection expression = ellipse(13679.281189, 18569.884979, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 31 00:54:51 2012] Writing source region out to fullrun_mos2_xmm0554770101_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 31 00:54:51 2012] Extracting stamp from image fullrun_mos2_xmm0554770101_pi300-10000_cl_sm2.00.img.gz, (83, 139) - (233, 289)
[Fri Aug 31 00:54:51 2012] XMMSAS bgd. selection expression = annulus(13679.281189, 18569.884979, 4350.000000, 8700.000000, X, Y) && !ellipse(21838.849800, 26051.608200, 356.316810, 356.316810, 0.000000, X, Y) && !ellipse(18553.082626, 13500.030869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19639.755585, 17838.440338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14510.570862, 27301.737366, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 00:54:51 2012] Writing fullrun_mos2_xmm0554770101_pi300-10000_pass1_cl_src1.gif
[Fri Aug 31 00:57:44 2012] Mean detx,y = (11953.06, -10955.34) 
[Fri Aug 31 00:57:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 00:58:51 2012] grppha failed
[Fri Aug 31 00:58:51 2012] Setting source spectrum file to fullrun_mos2_xmm0554770101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 00:58:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554770101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 31 01:01:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 01:01:37 2012] rmf not generated due to insufficient counts
[Fri Aug 31 01:02:21 2012] Updating aperture counts using extracted products
[Fri Aug 31 01:02:21 2012] Error reading totcts from fullrun_mos2_xmm0554770101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 01:02:21 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 01:02:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 01:02:24 2012] xmm0554770101/analysis//spectral/fullrun_mos2_xmm0554770101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete